Announcement

Collapse
No announcement yet.

New intel / raid / storage drivers X48

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New intel / raid / storage drivers X48


    Is this drive ok for Gigabyte X48 boards?I was told on another site that this can be updated from desk top on VISTA64 without a reinstall.I always like to have the most up to date drivers installed but dont want to create problems for myself.
    sigpic
    CoolerMaster 932haf
    ASUS P6T DELUVE V2
    Inte I7 920-4.0/4.2
    CoolIt DOMINO A.L.C
    CoolIt DualBay Gpu Cooler
    ASUS 4870-815/1050(crossfire)
    OCZ Platinum6GB DDR3-1600
    WesternDigtal VelociRaptor 300gb
    Corsair THX 750watt
    Vista Premium64sp2
    3DMARK06:28,515
    3DMARK VANTAGE 20,006

  • #2
    Re: New intel / raid / storage drivers X48

    That driver appears to be the one for Intels OWN x48 board - so No!

    For Intel Chipsets though, you have the "Inf" Chipset driver - a Must for Intel based boards, like your X48 &,

    If you use AHCI/Raid and wish to upgrade from the OS's Driver (in the case of VISTA) or upgrade from the F6 loaded Intel Driver (In the case of XP), then you need the Intel Matrix Storage Driver/Manager.

    Last edited by VorLonUK; 01-10-2009, 05:39 PM.
    GA-P35C-DS3R Rev2.0 F11 bios, E8200 (@3.0Ghz), OCZ DDR3 PC3-10666 Reaper 4GB (@1200Mhz), Xonar D1, 8800GTS 512, Corsair HX520 (Single 12volt line, Max 40A), WDC 3200aaks/5000aaks in AHCI mode, Vista 64 Premium.

    Comment


    • #3
      Re: New intel / raid / storage drivers X48

      You can Install Intel Chipset Drivers as mentioned above, they are universal between boards (Unless you grab a really old one or something funky) and are 32/64 Bit as well.

      Second Url is Mutli Board/OS/x86/x64
      Download Search Results!

      Or you could as also said install the Matrix Storage Manager which would also Update the drivers >>>

      First Link for the program is Mutli Board/OS/x86/x64
      Download Search Results!


      So either or will get the job done

      @VorLonUK.

      Not trying to step on your comment or anything at all, just wanted to link these for anyone else who reads this thread later so both mentioned would be linked here for all boards/systems

      Comment

      Working...
      X