If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
^For somebody work (not sure about Z77-D3H),without problem,
btw is not major bug and my answer is posted here,just yesterday.
So,guys do not repeat same questions every day,thanks.
^(RetrogamerX ?)...Depend on memory IC and setting of "Slew rate" (third memory timing) in the newest BIOS (or let him try F12, with classic memory timing).
Edit:
My Team 2600 (Samsung IC) in Auto...unstable,
slew rate 1,2.........no boot
slew rate 3..........rock solid,allowed me to run [email protected] (LinX 20 passes).
slew rate 4.....solid but not stable.
Of course other (memory) setting must be adjusted as well.
He can play with GTL or Mem TweakIt in Windows (Ivy Brigde only),to get stable memory combination,without to enter BIOS every time (it's recommended to leave CPU on stock).
Once he done,just implement in BIOS and save.
no not him its z77x d3h antar bolaeisk,and another user with corsair memory,same thing xmp or manual 1600mhz wont boot only 1333mhz
Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
Stasio, regarding my problem with Z77X-UD3H and the Corsair CMZ16GX3M2A1866C9 memory, I found out the board just doesn't like the XMP profile at all. If don't use it and set the memory to same values manually, I don't get any errors whatsoever.
Is there anywhere a place where I can download old beta bioses (F9a,F9b,F9c) for the P35-DS3L rev.2?
I can only find F9d and the final F9.
I lost them due to a HD crash some time ago. I'd like to start some tests with a new CPU.
I remember having better OC results with some beta bios than the final F9.
I just saw that the X79-UD5, X79-UD7 and G1.Assassin 2 have been discontinued. Which pretty much p*sses me off. Are there future BIOS updates to be expected, also with regard of supporting the coming 8-core Sandy Bridge-E and the new Ivy Bridge-E chips later this year?
Hi Stasio, thanks for your help. I followed that guide & setup the new BIOS. Couple problems now though, my graphics card isn't being detected at all & I also cannot over clock my processor.
Edit: I have the G1 Sniper 2 board with the U1C BIOS, managed to get the graphics card working. Still can not overclock my i7 3770k
Will be interesting to see if GIGABYTE TweakLauncher (GTL) working with Z68 (Award) and Ivy Brigde !?
It doesn't, gives 2 messages,
1 - Error "This Driver can't release to failure!!"
2 - Warning "Don't support the chipset of M.B. now!!"
After clicking through them, GTL window appears, model name and bios version are correctly identified, Frequency and Voltage sections are blank. It does seem to pick up the DDR Timings though.
Is there anywhere a place where I can download old beta bioses (F9a,F9b,F9c) for the P35-DS3L rev.2?
I can only find F9d and the final F9.
I lost them due to a HD crash some time ago. I'd like to start some tests with a new CPU.
I remember having better OC results with some beta bios than the final F9.
1 - Error "This Driver can't release to failure!!"
2 - Warning "Don't support the chipset of M.B. now!!"
After clicking through them, GTL window appears, model name and bios version are correctly identified, Frequency and Voltage sections are blank. It does seem to pick up the DDR Timings though.
Comment