Hi all
sorry for my bad english, but i give it a try. (also copy a lot from the form ;) tx THE EDGE post)
I finaly found a forum that hopeful can help me with my problem.
I read a lot of the same problems in this forum, so i give it a try over here.
I'm built a system 3 months ago like this:
Case: Antec Nine Hunderd
Motherboard: GigaByte X48T-DQ6
Processor: Intel Core 2 Duo Q9450 2.6GHz (12MB cache)
Processor Cooler: Scythe Mugen SCINF-1000
Memory: 2x OCZ3G13334GK total 8GB
Video: Sapphire ATI Radeon HD 4870X2
Power: Thermaltake Toughpower CM 850W
Windows Vista Ultimate 64-bits
My system runs not stable, it will always total freez.
This happens after different times. from 1 minute, half an hour, 2 hours, 8 hours, one day.
I have run memory test with no problem.
Also benchmark test with no problem.
I think that my system is the most stable with 1 Memory module (SS) in socket 1. (Running at default setting (1066Mhz)). 2Gb
Also stable with 2 Memory module (SS) in socket 1 and socket 2. (Running at default setting (1066Mhz)). 4Gb
More un-stable with 2 Memory module (DS) in socket 1 and socket 3. (but still freez) 4Gb
and most un-stable with 4 Memory module (DS) pair in socket 1 and 3, and pair in socket 2 and 4.(but still freez) 8Gb
I'm also think that when i start with a cold system the system runs for the longest time.
After the first freez i reset the system and freez wil come faster.(looks like heat problems but al temps looks fine)
I have re-flashed the BIOS with F5 and loaded the optimized default settings.
The BIOS recognizes all 8GB at 1066 with 9,9,9,20 timings.
OCZ give 1333 9 9 9 20 1.7V info on there site
OCZ Technology | Products | Memory | OCZ DDR3 PC3-10666 Gold Edition
But all other sites and shops give 1333 9 9 9 26 1.7V (Strange)
I try to change the follow things:(but became more un-stable)
System Memory Multiplier [4.00B]
Memory Frequency [1333]
CAS [9]
Dram RAS to CAS# [9]
DRAM RAS Precharge [9]
Precharge Delay [20] and [26]
DDR3 OverVoltage Control [0.20] > 1.7V
So my settings are now set to default like this:
******M.I.T. Intelligent Tweaker (MIT)**********
Robust Graphics Booster [Auto]
CPU Clock Ratio [8]
Fine CPU Clock Ratio [0.0]
CPU Frequency 2.66Ghz (333x8)
CPU Host Clock Control [Disabled]
CPU Host Frequency [333]
PCI Express Frequency [Auto]
C.I.A.2 [Disabled]
Performance Enhance [Standard]
System Memory Multiplier (SPD) [Auto]
Memory Frequency [1066]
Dram Timing Selectable [Auto]
*****Standard Timing Control*******
CAS Latency Time [9]
Dram RAS to CAS# Delay [9]
DRAM RAS Precharge [9]
Precharge Delay (tRAS) [20]
*EDIT Default settings with 2 Memorys in socket 1 and 2 (SS)*
********Advanced timing control:********
ACT to ACT Delay (tRRD) [4]
Rank Write to Read Delay [4]
Write to Precharge Delay [8]
Refresh to ACT Delay [48]
Read to Precharge Delay [4]
Static tRead Value [9]
Static tRead Phase Adjust [22]
Comand Rate (CMD) [1]
********Clock Driving & Skew Control:*************
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [Normal]
(G)MCH Clock Skew Controle [Normal]
*********System Voltage Control:**********
System Voltage Control [Manual]
DDR3 OverVoltage Control [Normal]
PCI-E Overvoltage Control [Normal]
FSB OverVoltage Controle [Normal]
(G)MCH Overvoltage Controle [Normal]
Loadline Calibration [Auto]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.25000V
Hopefully someone can help me with this problem.
Thanks in advance.
Leesie
sorry for my bad english, but i give it a try. (also copy a lot from the form ;) tx THE EDGE post)
I finaly found a forum that hopeful can help me with my problem.
I read a lot of the same problems in this forum, so i give it a try over here.
I'm built a system 3 months ago like this:
Case: Antec Nine Hunderd
Motherboard: GigaByte X48T-DQ6
Processor: Intel Core 2 Duo Q9450 2.6GHz (12MB cache)
Processor Cooler: Scythe Mugen SCINF-1000
Memory: 2x OCZ3G13334GK total 8GB
Video: Sapphire ATI Radeon HD 4870X2
Power: Thermaltake Toughpower CM 850W
Windows Vista Ultimate 64-bits
My system runs not stable, it will always total freez.
This happens after different times. from 1 minute, half an hour, 2 hours, 8 hours, one day.
I have run memory test with no problem.
Also benchmark test with no problem.
I think that my system is the most stable with 1 Memory module (SS) in socket 1. (Running at default setting (1066Mhz)). 2Gb
Also stable with 2 Memory module (SS) in socket 1 and socket 2. (Running at default setting (1066Mhz)). 4Gb
More un-stable with 2 Memory module (DS) in socket 1 and socket 3. (but still freez) 4Gb
and most un-stable with 4 Memory module (DS) pair in socket 1 and 3, and pair in socket 2 and 4.(but still freez) 8Gb
I'm also think that when i start with a cold system the system runs for the longest time.
After the first freez i reset the system and freez wil come faster.(looks like heat problems but al temps looks fine)
I have re-flashed the BIOS with F5 and loaded the optimized default settings.
The BIOS recognizes all 8GB at 1066 with 9,9,9,20 timings.
OCZ give 1333 9 9 9 20 1.7V info on there site
OCZ Technology | Products | Memory | OCZ DDR3 PC3-10666 Gold Edition
But all other sites and shops give 1333 9 9 9 26 1.7V (Strange)
I try to change the follow things:(but became more un-stable)
System Memory Multiplier [4.00B]
Memory Frequency [1333]
CAS [9]
Dram RAS to CAS# [9]
DRAM RAS Precharge [9]
Precharge Delay [20] and [26]
DDR3 OverVoltage Control [0.20] > 1.7V
So my settings are now set to default like this:
******M.I.T. Intelligent Tweaker (MIT)**********
Robust Graphics Booster [Auto]
CPU Clock Ratio [8]
Fine CPU Clock Ratio [0.0]
CPU Frequency 2.66Ghz (333x8)
CPU Host Clock Control [Disabled]
CPU Host Frequency [333]
PCI Express Frequency [Auto]
C.I.A.2 [Disabled]
Performance Enhance [Standard]
System Memory Multiplier (SPD) [Auto]
Memory Frequency [1066]
Dram Timing Selectable [Auto]
*****Standard Timing Control*******
CAS Latency Time [9]
Dram RAS to CAS# Delay [9]
DRAM RAS Precharge [9]
Precharge Delay (tRAS) [20]
*EDIT Default settings with 2 Memorys in socket 1 and 2 (SS)*
********Advanced timing control:********
ACT to ACT Delay (tRRD) [4]
Rank Write to Read Delay [4]
Write to Precharge Delay [8]
Refresh to ACT Delay [48]
Read to Precharge Delay [4]
Static tRead Value [9]
Static tRead Phase Adjust [22]
Comand Rate (CMD) [1]
********Clock Driving & Skew Control:*************
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [Normal]
(G)MCH Clock Skew Controle [Normal]
*********System Voltage Control:**********
System Voltage Control [Manual]
DDR3 OverVoltage Control [Normal]
PCI-E Overvoltage Control [Normal]
FSB OverVoltage Controle [Normal]
(G)MCH Overvoltage Controle [Normal]
Loadline Calibration [Auto]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.25000V
Hopefully someone can help me with this problem.
Thanks in advance.
Leesie
Comment