Re: X48T-DQ6 issues with OCZ3G13334GK Memory
Sorry Lsdmeasap
I give up, my system is still un-stable.
I told my problem als to the shop where my Motherboard and memory came from.
They say the Gigabyte X48T-DQ6 is a great motherboard and...
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse
Leesie
Junior Member
Last Activity: 10-14-2008, 12:52 PM
Joined: 10-07-2008
Location:
-
Re: X48T-DQ6 issues with OCZ3G13334GK Memory
run Prime95 test now.
with all fans on Max speed.
use CPUID hardware Monitor.
Intel Core Quad Q9450:
Core#0 51C-123F
Core#1 45C-113F
Core#2 49C-120F
Core#3 48C-118F
Temperatures:...
Leave a comment:
-
Re: X48T-DQ6 issues with OCZ3G13334GK Memory
i think a have a heat problem.
I have test a lot of setting, but almost any change from defaul settings make more unstable.
There was 1 good setting like this.
*****Standard Timing Control*******
CAS Latency...Last edited by Leesie; 10-09-2008, 10:54 AM.
Leave a comment:
-
Re: X48T-DQ6 issues with OCZ3G13334GK Memory
Next test like this:
Robust Graphics Booster [Auto]
CPU Clock Ratio [8]
Fine CPU Clock Ratio [0.0]
CPU Frequency 2.66Ghz (333x8)
CPU Host Clock Control [Disabled]
CPU Host Frequency [333]...Last edited by Leesie; 10-08-2008, 09:46 AM.
Leave a comment:
-
Re: X48T-DQ6 issues with OCZ3G13334GK Memory
Next test like this:
Robust Graphics Booster [Auto]
CPU Clock Ratio [8]
Fine CPU Clock Ratio [0.0]
CPU Frequency 2.66Ghz (333x8)
CPU Host Clock Control [Disabled]
CPU Host Frequency [333]...Last edited by Leesie; 10-08-2008, 07:14 AM.
Leave a comment:
-
Re: X48T-DQ6 issues with OCZ3G13334GK Memory
I'm back in the Bios.
Next test like this:
Robust Graphics Booster [Auto]
CPU Clock Ratio [8]
Fine CPU Clock Ratio [0.0]
CPU Frequency 2.66Ghz (333x8)
CPU Host Clock Control...Last edited by Leesie; 10-08-2008, 07:14 AM.
Leave a comment:
-
Re: X48T-DQ6 issues with OCZ3G13334GK Memory
I have change the things you suggest (highest, but for DDR3 Overvoltage Controle [+.2]
System don't start, restart 3 times by his self.
And change:
System Memory Multiplier (SPD) to [Auto] (1066Mhz)
Dram...Last edited by Leesie; 10-08-2008, 07:30 AM.
Leave a comment:
-
Re: X48T-DQ6 issues with OCZ3G13334GK Memory
Whoo thanks for your fast support Lcdmaisap.
I'm going to change what your suggest, Today.
System Memory Multiplier (SPD) [4.00] << must i use 4.00B because the 333?
Greets LeesieLast edited by Leesie; 10-08-2008, 02:41 AM.
Leave a comment:
-
X48T-DQ6 issues with OCZ3G13334GK Memory
Hi all
sorry for my bad english, but i give it a try. (also copy a lot from the form ;) tx THE EDGE post)
I finaly found a forum that hopeful can help me with my problem.
I read a lot of the same problems in this forum, so i give it a try over here.
I'm built a system 3 months...Last edited by Leesie; 10-10-2008, 01:27 AM.
No activity results to display
Show More
Leave a comment: