Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

[dosign]

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

Well either way you should not see any jump in temps just because of some new ram. Maybe a degree or two from switching from 2x1 to 2x2 but it should not be noticable

Those are memory timings for your memory, not your 940 silly? J/K

Robust Graphics Booster___________ [Auto or fast]
CPU Clock Ratio ____________ [16]
Fine Clock Ratio ____________[0.0]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [200]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [4.00C] << you wont be able to run 1000Mhz until you overclock the FSB to at least 250

DRAM Timing Selectable_______ SPD __ [Manual]

Performance Enhance = [Standard]

CAS Latency Time________________5
Dram RAS# to CAS# Delay_________ 5
Dram RAS# Precharge Delay_______5
Precharge Delay (tRAS)__________ 12

ACT to ACT Delay (tRRD)_________ 3-4
Rank Write to READ Delay________ 3-5
Write to Precharge Delay_________ 4-6
Refresh to ACT Delay______________ (46-50) 52-62
Read to Precharge Delay__________ 3-5
Static tRead Value_______________6/7-10
Static tRead Phase Adjust________ [Auto]

System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.20V - +0.3] = 2.0-2.1v
PCI-E OverVoltage Control_ [+0.1V]
FSB OverVoltage Control___ [+0.1V]
(G)MCH OverVoltage Control [+0.15V - +0.3]

Legacy USB Storage detect causes many random issues is why I always suggest it be disabled unless you are using it