Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

Let me know if you need help, if you do still please post a link to your ram and let me know how much you are using, what CPU you have and what you are trying to run and I will help you out

[marph]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

Processor Summary
Processor: Intel Core 2 Quad Q600 2400 MHz, Kentsfield (0.065mk)
CPU Clock: 2400.0 MHz (9.0 x 266.7 MHz QDR)
Motherboard Summary
Board Model: Gigabyte Technology Co., Ltd. EP35-DS3P
BIOS: F6A - 07/30/2008-P35-ICH9-6A89OG0QC-00
RAM Summary
Slot #1: G.SKill, F2-6400CL4D-1GBPK, DDR2-800, Unbuffered, 240-pin DIMM, PCB 6 Layers
Slot #2: G.SKill, F2-6400CL4D-1GBPK, DDR2-800, Unbuffered, 240-pin DIMM, PCB 6 Layers
Slot #3: G.SKill, F2-6400CL4D-1GBPK, DDR2-800, Unbuffered, 240-pin DIMM, PCB 6 Layers
Slot #4: G.SKill, F2-6400CL4D-1GBPK, DDR2-800, Unbuffered, 240-pin DIMM, PCB 6 Layers

Memtest-Results:

TESTED WITH:
Slot #1: F2-6400CL4D-1GBPK
Slot #2: empty
Slot #3: F2-6400CL4D-1GBPK
Slot #4: empty

*** Crashed in the first 30 seconds: ***
DDR2 OverVoltage Control [+0.3V]
FSB OverVoltage Control [Normal]
(G)MCH OverVoltage Control [Normal]

DDR2 OverVoltage Control [+0.3V]
FSB OverVoltage Control [Normal]
(G)MCH OverVoltage Control [+0.1V]

DDR2 OverVoltage Control [+0.3V]
FSB OverVoltage Control [+0.2V]
(G)MCH OverVoltage Control [+0.1V]

DDR2 OverVoltage Control [+0.1V]
FSB OverVoltage Control [+0.1V]
(G)MCH OverVoltage Control [+0.1V]

DDR2 OverVoltage Control [+0.2V]
FSB OverVoltage Control [+0.2V]
(G)MCH OverVoltage Control [Normal


*** Crashed after one minute: ***
DDR2 OverVoltage Control [+0.1V]
FSB OverVoltage Control [+0.1V]
(G)MCH OverVoltage Control [Normal]

DDR2 OverVoltage Control [+0.3V]
FSB OverVoltage Control [+0.2V]
(G)MCH OverVoltage Control [Normal]

** Crashed after half an hour: ***
TESTED WITH:
Slot #1: F2-6400CL4D-1GBPK
Slot #2: empty
Slot #3: empty
Slot #4: empty

DDR2 OverVoltage Control [Normal]
FSB OverVoltage Control [+0.2V]
(G)MCH OverVoltage Control [Normal]

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

Try MCH Voltage +0.25-.3 for 4x1GB and your ram at 2.1. Refresh to act delay on 62 for now and static Tread on 10 for now as well.

[dosign]

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

No, Pentium D does not support those features is why. Nice to hear you are all up and running smoothly!

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

No, Pentium D does not support those features is why. Nice to hear you are all up and running smoothly!

[dosign]

[dosign]

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

Dosign, what CPU speed (FSB) are you going to be running and I can post you some settings for your redlines?

[dosign]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

Dosign, what CPU speed (FSB) are you going to be running and I can post you some settings for your redlines?

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

Ahh OK... Here would be stock optimal setting then >>>

HEY Pentium D is not 1333 at stock, what gives here?


Let me know if you are indeed running that CPU or if not what CPU you are using and I will edit this table more

Robust Graphics Booster___________ [Auto or fast]
CPU Clock Ratio ____________ [?] 
Fine Clock Ratio ____________[0.0]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [?] 
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [?]
DRAM Timing Selectable_______ SPD __ [Manual]

Performance Enhance = [Standard]

CAS Latency Time________________5
Dram RAS# to CAS# Delay_________ 5
Dram RAS# Precharge Delay_______5
Precharge Delay (tRAS)__________ 12

ACT to ACT Delay (tRRD)_________ 3-4
Rank Write to READ Delay________ 3-5
Write to Precharge Delay_________ 4-6
Refresh to ACT Delay______________ (46-50) 52-62
Read to Precharge Delay__________ 3-5
Static tRead Value_______________6/7-10
Static tRead Phase Adjust________ [Auto]

System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.20V - +0.3] = 2.0-2.1v
PCI-E OverVoltage Control_ [+0.1V] 
FSB OverVoltage Control___ [+0.1V] 
(G)MCH OverVoltage Control [+0.15V - +0.3] 
CPU Voltage Control_______ [?]

Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

Integrated Peripherals
Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

[marph]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

I bought an Asus-Board and now everything is ok. I rma the ep35-board.

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

Ahh ok!

[dosign]

[Lsdmeasap]

Re: Tweaking ga-p35-ds4 rev.2.0 / Server 2008 Enterprise 64-bit

What? Ram change is not going to add any heat to your case, at all. Maybe if you went from 2x1GB to 2x2GB then you may see a 2-3C rise in NB temps but that would be all.

If anything the G.Skills would be warmer just by physics as they have a MUCH Thinner heatsink so less heat would be absorbed into the heatsink before passed into the air.

Going from 800 to 1000Mhz may add a bit of heat, but nothing you should notice for sure. I am thinking maybe it is all in your head cause the heatsink is red?

J/K

But seriously I can use 2x1GB in my system or 4x2GB and see no change in temps at all, at 800 or 1000Mhz