Re: FM2A88X+ Fatality RAM won't run beyond 1600
Bleh. I must have been thinking of the ASRock QVL. My bad!!
Announcement
Collapse
No announcement yet.
FM2A88X+ Fatality RAM won't run beyond 1600
Collapse
X
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Originally posted by ASCI Blue View PostI've searched the 'egg for most to all those kits with no success. :/
ASRock | AMD Socket FM2+ A88X/A78 for Socket FM2+ | Fatal1ty FM2A88X+ Killer
On the 'Egg off the G.Skill list: (double check me before ordering, cross-check me using the Configurator yourself again)
[Sniper] F3-17000CL9D-8GBSR - G.SKILL Sniper Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9D-8GBSR - Newegg.com
[RipjawsX] F3-17000CL9D-8GBXM - G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9D-8GBXM - Newegg.com
[Ares] F3-2133C10D-8GAB - Newegg.com - G.SKILL Ares Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-2133C10D-8GAB
[Sniper] F3-2133C10D-8GSR - Newegg.com - G.SKILL Sniper Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-2133C10D-8GSR
and possibly more listed at the 'Egg but I quit after checking the first four 8GB kits.Last edited by - wardog -; 03-31-2014, 10:45 PM.
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Originally posted by ASCI Blue View Post........an ASRock rep told me to RMA the board. :/
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
I've searched the 'egg for most to all those kits with no success. :/ The closest comparable is the F3-2133XXXXXXX and I can't seem to find it anywhere. What's almost worse an ASRock rep told me to RMA the board. :/
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Oh BTW, as Abyssmal said and Spectrum Legacy hinted at on his post 188 "It also affects your sata, usb and other controllers". That 133 may well have corrupted your OS install.
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Seriously now, all joking aside. Send that memory back for one of the 2133 kits shown on G.Skills RAM Configurator results when you key in the proper asked for items at the top of it's page.
Matt hasn't answered there and times getting on for you to exchange it with/for some KNOWN compatible memory. End this nonsense you're putting yourself though.
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Originally posted by ASCI Blue View PostI know Spectrum, I'm on 49 or 50 in that thread. :D
ROTFLMAO, no kidding? You bumped it to 133? PHHHhhhheewwwwwww hahahahaha did I say I was ROTFLMAO ............
I for a reason didn't touch that when you asked here of it as I knew you'd find the answer out immediately after trying. ROTFLMAO
Time to wipe the blackboard clean and begin anew.
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
I know what it meant but yours is higher than a kite. Mine is 1.2 something. Kaveri is pretty impressive power wise, a 95 watt chip plus smaller die. I think my NB is set to 1.0XX too keep in mind all my settings are stock.
I know Spectrum, I'm on 49 or 50 in that thread. :D
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Today in reading some posts scattered across the 'net concerning Kaveri and your Killer board, you want to try something there? I don't know why this might help at 2133 stock but some posts indicate it indeed does. Worth a shot but watch your temps while doing so if you choose.
BIOS > OC Tweaker - "APU PCIE Voltage VDDP" , your screenies show it at 1.052V, best I can tell is this boards BIOS Default(and incorrect?!?), bump this to 1.160V and retry. HERE is where to jump in and begin reading Spectrum Legacy's posts. Must thank them for their thorough posts while troubleshooting there.
EDIT: I chose to link Spectrum Legacy's posts as most of the dozen or or so tabs I had open in my browser the posts only showed images and or fleeting references. Spectrum Legacy's on the other had, well, his post there concerning this does an excellent job at describing the steps taken and the results of each test to come to that conclusion. My hat's off to him.Last edited by - wardog -; 03-31-2014, 04:39 PM.
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Originally posted by - wardog - View PostMight I suggest you pull your "Multiplier/Voltage Change" from Auto to Manual in the BIOSes OC Tweaker page, then report back what your "CPU Voltage" shows. Or in A-Tunings OC Tweaker tab, as it's displayed there too.
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Originally posted by ASCI Blue View Post1.4 volts for the CPU?? :O What's your nb voltage set to?
Might I suggest you pull your "Multiplier/Voltage Change" from Auto to Manual in the BIOSes OC Tweaker page, then report back what your "CPU Voltage" shows. Or in A-Tunings OC Tweaker tab, as it's displayed there too.
CPU/NB GFX Voltage: 1.35000, looking at it just now in A-Tuning
Again, these are all stock values for my FM2A88X Extreme6+ and A10-6800K while using BIOS 2.70.
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
1.4 volts for the CPU?? :O What's your nb voltage set to?
Leave a comment:
-
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Criminy, if you're looking at ASRocks Memory QVL, that's basically useless now. They, ASRock, are first and foremost a motherboard manufacturer and thus have a limited and in some cases outdated in-house "store' of memory with which they test.
I've put a link here in this thread that takes you to G.Skill's Ram Configurator with this boards pre-set list of memory G.Skill, being first and foremost a memory manufacturer, continually updates and has been verified by G.Skill to work on this motherboard. Or use the link in my Sig and enter what's required to view the results.
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
I've had this stuff since the 18th or so, order was placed the 14th iirc. I have been checking the 'egg to see if anything on the qvl is in stock and it seems the majority isn't. It's rather frustrating to have a huge list and nothing in stock, this comes from my retail days when the new year's product was released. Old stuff is gone, new stuff isn't in yet.
Leave a comment:
Leave a comment: