Re: FM2A88X+ Fatality RAM won't run beyond 1600
Found me on another forum did ya? ;) Still haven't hit 2133, a friend of mine and I who've been spending too much time together agreed that we'd make a pretty good couple so my time has been spent with her and prepping costumes for various...
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse
ASCI Blue
Junior Member
Last Activity: 06-20-2014, 10:21 AM
Joined: 03-20-2014
Location: in an apartment
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Gotcha, the voltage looks nice and stable. I toyed around a little more today with timings and stuff, 2133 would post but freeze when in the bios. When I tried to boot to winders it gave me the corruption crap again so I think your recommendation...
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
From my understanding of voltage in relation to Kaveri overall they look peachy. Most people I've seen don't push beyond 1.3 unless there's some serious overclocking going on. Everything else is what I've found from people who have nb and...
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
You suggested HWinfo 13 and 8 hours ago which would have put it around 8 pm which was around feeding time and about the same time I started my 13.60 hour long memtest at 1866. Running HWinfo as I type this since..you know, I'm back on my...
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
I suppose I ought to have said a few posts ago that I took a meter to the psu. I think you confirmed in a prior post here that your board had shut itself off and turned on again while changing some setting or another and with that in mind...
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
I'm currently running memtest at 1866, I raised my nb speed to 2 ghz, raised voltage on ram, vddp, northbridge, and igpu, disabled cool'n'quiet as well as C1 or C6 (not sure which number brain fart), manuallt set timings pretty loose at...
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Decided to be a bit more aggressive today with settings, raised voltage on several things to recommended levels and even a hair beyond based partially what I found on G.Skill's site with the same RAM kit and different boards. Wardog, I didn't...
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
Bleh. I must have been thinking of the ASRock QVL. My bad!!
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
I've searched the 'egg for most to all those kits with no success. :/ The closest comparable is the F3-2133XXXXXXX and I can't seem to find it anywhere. What's almost worse an ASRock rep told me to RMA the board. :/
Leave a comment:
-
Re: FM2A88X+ Fatality RAM won't run beyond 1600
I know what it meant but yours is higher than a kite. Mine is 1.2 something. Kaveri is pretty impressive power wise, a 95 watt chip plus smaller die. I think my NB is set to 1.0XX too keep in mind all my settings are stock.
...
Leave a comment:
No activity results to display
Show More
Leave a comment: