lo guys, first post - be nice :))
recently (sunday ffs ;)) i bought a Leadtek GeForce3 Ti200. Assuming these cards were as good as i thought they were i just took out my TNT2 Pro (ph33r ;)), and shoved in this gf3 ti200 beauty...
No boot....no display...no nothing
All i got was power up. At first i thought hmm, uh oh - not the bp6 incident again (long story) so i decided shove in my old tnt2, to makesure nothing had died in the process of sticking this in.
Phew, i got a bootup. So at first i thought - maybe the card doesn't work. But before i was going to give up, i dived into the bios. Just out of interest I decided to disable AGPx4.
Switched off, took out tnt2, put gf3 in. Turned pc on....
WHALA - booted fine and i'm usin it now.
the only problem is, i want to know why agp x4 doesn't work ? My system is;
Normal 230W power supply
Duron 700 @ 900 (150x6)
Abit KT7A-RAID Mobo
1x256 pc133 ram
Leadtek GeForce3 Ti200 T
Sound Blaster 128 PCI sound card
1xPCI Realtek RTL-8029 network card &
1xISA Realtek RTL-8029 network card
Quantom Fireball AS40, 40GB HD
Philips 40x CD-ROM
Philips 32x4x4 CD Re-Writer
Normal floppy drive
If anyone has any suggestiongs or knows why, please tell me anythin ya know - thx :)
BTW:
My GF3 isn't overclocked yet! (:)) and my 3dmark2001 SE score is here : http://service.madonion.com/servlet/...&projectType=6
my other problem is does having agpx4 speed anything up, and will i gain anything from finding some sort of fix for this ?
recently (sunday ffs ;)) i bought a Leadtek GeForce3 Ti200. Assuming these cards were as good as i thought they were i just took out my TNT2 Pro (ph33r ;)), and shoved in this gf3 ti200 beauty...
No boot....no display...no nothing
All i got was power up. At first i thought hmm, uh oh - not the bp6 incident again (long story) so i decided shove in my old tnt2, to makesure nothing had died in the process of sticking this in.
Phew, i got a bootup. So at first i thought - maybe the card doesn't work. But before i was going to give up, i dived into the bios. Just out of interest I decided to disable AGPx4.
Switched off, took out tnt2, put gf3 in. Turned pc on....
WHALA - booted fine and i'm usin it now.
the only problem is, i want to know why agp x4 doesn't work ? My system is;
Normal 230W power supply
Duron 700 @ 900 (150x6)
Abit KT7A-RAID Mobo
1x256 pc133 ram
Leadtek GeForce3 Ti200 T
Sound Blaster 128 PCI sound card
1xPCI Realtek RTL-8029 network card &
1xISA Realtek RTL-8029 network card
Quantom Fireball AS40, 40GB HD
Philips 40x CD-ROM
Philips 32x4x4 CD Re-Writer
Normal floppy drive
If anyone has any suggestiongs or knows why, please tell me anythin ya know - thx :)
BTW:
My GF3 isn't overclocked yet! (:)) and my 3dmark2001 SE score is here : http://service.madonion.com/servlet/...&projectType=6
my other problem is does having agpx4 speed anything up, and will i gain anything from finding some sort of fix for this ?
Comment