If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My XP2200+ @ 1900MHz atm w/ SETI running in a room temp of 28C is gettin' a system temp of 32C and CPU temp of 46C w/ Volcano 7+ on medium speed plus all the PC's here that are runnin' SETI all show 100% CPU usuage. ;)
<center>:cheers:</center>
Nothin' wrong there then if acurate (this is Asus that we're talkin' about) but have ya checked that ya have the clip for the HSF around the right way and that the contact point is directly over the core as this is a common mistake to make?. :?:
<center>:cheers:</center>
BTW - I'm noticing that SETI pegs the box at 100%, but prime95 seems to yield slightly higher temperatures.. and CPUburnCPUBurn seems to kick the %$#% out of the proc...
Anybody know what cpuburn is doing to stress the box like that ?
Those Temps sound fine but it would be so much better to include the room temp as well for a true comparison. ;)
Atm it's 46C outside and 43C upstairs so SETI was turned off as well as Thunder plus I'm debuin' now whether or not to turn the server off as well (now how much was a Prometeia again? :?: )
But at least the 3 PC's down here are still crunchin' away in a more comfortable 33C. :D
<center>:cheers:</center>
Well for comparisons sake room temp is 15.6, interior case temp is 25.9, system temp is 29 and the cpu temp is 34. I have noticed that others with the MSI boards are also reporting temps that seem high. If I take the case sides off I see a copule of deg. drop in temp but I am comfortable with the temps that I get. I dont want to install higher speed fans to cool the case as its loud enough right now with the 8000 rpm fan on the cpu. I plan to install some in the near future just for the heck of it and see how much louder it gets. hope this helps you out!
I have a XP 2100+ with a Volcano 7+. My normal temp. is around 33C, and when I am decoding about 5 Mpeg files @ 700MB each, my temp is 44C to 46C. I also re-wired my fans in my case, so now when my computer is on, it feels like a hericane in there.
Oh, any luck overclocking the XP2100+? my max is 1924MHz, but still not very stable at times...
Later.
Comment