p67a-ud3p-b3, latest bios. Been running this since 1/2011 (yes, had to exchange board back then due to b3 issue) without issues. Experiencing problems last month which may be hardware related. Running W10, pro, 32 bit, since July, and was OK till ann update. Tried all kind of remedies including repair install. Only boots properly 1 out of 4. Other hardware is
2500k stock, 212+ evo heatsink/fan
Antec 550watt psu
Sandisk SSd plus, 256G, passes Sandisks smart test
2x2gb adata ddr3 pc1600
idling temps 35-39
Problem exists with slots 1/3 loaded. Will not boot at all with 2/4 loaded...no post, will start and stop cycle every few seconds, with no end. I let this go for 5 minutes. Bad boot with slot 1. This is being posted after a good boot with 1 stick in slot 2.
Should I suspect the board, the memory, or my sanity? Thanks for listening.
2500k stock, 212+ evo heatsink/fan
Antec 550watt psu
Sandisk SSd plus, 256G, passes Sandisks smart test
2x2gb adata ddr3 pc1600
idling temps 35-39
Problem exists with slots 1/3 loaded. Will not boot at all with 2/4 loaded...no post, will start and stop cycle every few seconds, with no end. I let this go for 5 minutes. Bad boot with slot 1. This is being posted after a good boot with 1 stick in slot 2.
Should I suspect the board, the memory, or my sanity? Thanks for listening.
Comment