Thanks to profJim's karma I finally managed to get my BIOS to respond to the DELETE key again.
Now I think it is a good idea to tweak it a little bit and then save it with F11.
First of all I would like the BIOS settings to fit standard cpu clock. (Maybe some moderate overclocking later).
ProfJim already helped me to get the RAM stable on 1066 Mhz @5-5-5-15
This is what I have sofar but I'm sure there is some room for improvement:
Motherboard: Gigabyte
Model: P43-ES3G (Socket 775) Rev#: 1.1 Bios Version: F14
Cpu: Intel Core2 Quad 9550s
Ram: 4 x 2 GB ddr2 1066 Mhz Kingston HyperX
Power Supply Unit: Seasonic M12 500 watt
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster -------- : [Auto]
CPU Clock Ratio ---------------- : [8x]
Fine CPU Clock Ratio ----------- : [+0.5]
CPU Frequency -------------- : 2.83 GHz (333x8.5)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control --------- : [Enabled]
CPU Host Frequency (Mhz) ------- : [333]
PCI Express Frequency (Mhz) ---- : [100]
DRAM Performance Control
Performance Enhance ------------ : [Turbo]
(G)MCH Frequency Latch --------- : [333MHz]
System Memory Multiplier (SPD) ------- : [3.20B]
Memory Frequency (Mhz) --------- : [800 1066]
DRAM Timing Selectable (SPD)--------- : [Manual]
Standard Timing Control
CAS Latency Time --- 5 ---- : [5]
tRCD ------------------ 5 ---- : [5]
tRP -------------------- 5 ---- : [5]
tRAS ------------------ 18 ---- : [15]
Advanced Timing Control
tRRD ----------------- 3 --- : [Auto]
tWTR ------------------ 3 ---- : [Auto]
tWR -------------------- 6 ---- : [Auto]
tRFC ------------------ 52 --- : [Auto]
tRTP ------------------ 3 ---- : [Auto]
Command Rate (CMD) 0 ---- : [Auto]
Channel A Timing Settings -- {Press Enter to change settings}
Static tRead Value ------------- : 6 [8]
tRD Phase0 Adjustment ---------- : 0 [Auto]
tRD Phase1 Adjustment ---------- : 0 [Auto]
tRD Phase2 Adjustment ---------- : 0 [Auto]
tRD Phase3 Adjustment ---------- : 0 [Auto]
Trd2rd(Different Rank) -------- : 8 [Auto]
Twr2wr(Different Rank) -------- : 8 [Auto]
Twr2rd(Different Rank) --------- : 7 [Auto]
Trd2wr(Same/Diff Rank) ------- : 9 [Auto]
Dimm1 Clock Skew Control ----- : [Auto]
Dimm2 Clock Skew Control ----- : [Auto]
DDR Write Training ------------ : [Auto]
Channel B Timing Settings -- {Press Enter to change settings}
Static tRead Value ------------- : 6 [8]
tRD Phase0 Adjustment ---------- : 0 [Auto]
tRD Phase1 Adjustment ---------- : 0 [Auto]
tRD Phase2 Adjustment ---------- : 0 [Auto]
tRD Phase3 Adjustment ---------- : 0 [Auto]
Trd2rd(Different Rank) -------- : 8 [Auto]
Twr2wr(Different Rank) -------- : 8 [Auto]
Twr2rd(Different Rank) --------- : 7 [Auto]
Trd2wr(Same/Diff Rank) ------- : 9 [Auto]
Dimm1 Clock Skew Control ----- : [Auto]
Dimm2 Clock Skew Control ----- : [Auto]
DDR Write Training ------------ : [Auto]
Motherboard Voltage Control
CPU Voltage Types--------- Normal ----- Current -----
CPU Vcore ----------- 1.20000V -- : [Auto]
CPU Termination ----- 1.200V -- : [Auto]
CPU Reference ------- 0.805V -- : [Auto]
MCH Core ------------- 1.100V -- : [1.200]
DRAM Voltage --------- 1.800V -- : [2.000V]
Advanced Settings
Limit CPUID Max. to 3 ---------- : [Disabled]
No-Execute Memory Protect ------ : [Enabled]
CPU Enhanced Halt (C1E) -------- : [Disabled]
C2/C2E State Support ----------- : [Disabled]
x C4/C4E State Support --------- : [Disabled]
CPU Thermal Monitor 2 (TM2) ---- : [Enabled]
CPU EIST Function ------------- : [Disabled]
Virtualization Technology ------ : [Disabled]
Integrated Peripherals
USB Storage Function ----- : [Enabled]
Now I think it is a good idea to tweak it a little bit and then save it with F11.
First of all I would like the BIOS settings to fit standard cpu clock. (Maybe some moderate overclocking later).
ProfJim already helped me to get the RAM stable on 1066 Mhz @5-5-5-15
This is what I have sofar but I'm sure there is some room for improvement:
Motherboard: Gigabyte
Model: P43-ES3G (Socket 775) Rev#: 1.1 Bios Version: F14
Cpu: Intel Core2 Quad 9550s
Ram: 4 x 2 GB ddr2 1066 Mhz Kingston HyperX
Power Supply Unit: Seasonic M12 500 watt
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster -------- : [Auto]
CPU Clock Ratio ---------------- : [8x]
Fine CPU Clock Ratio ----------- : [+0.5]
CPU Frequency -------------- : 2.83 GHz (333x8.5)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control --------- : [Enabled]
CPU Host Frequency (Mhz) ------- : [333]
PCI Express Frequency (Mhz) ---- : [100]
DRAM Performance Control
Performance Enhance ------------ : [Turbo]
(G)MCH Frequency Latch --------- : [333MHz]
System Memory Multiplier (SPD) ------- : [3.20B]
Memory Frequency (Mhz) --------- : [800 1066]
DRAM Timing Selectable (SPD)--------- : [Manual]
Standard Timing Control
CAS Latency Time --- 5 ---- : [5]
tRCD ------------------ 5 ---- : [5]
tRP -------------------- 5 ---- : [5]
tRAS ------------------ 18 ---- : [15]
Advanced Timing Control
tRRD ----------------- 3 --- : [Auto]
tWTR ------------------ 3 ---- : [Auto]
tWR -------------------- 6 ---- : [Auto]
tRFC ------------------ 52 --- : [Auto]
tRTP ------------------ 3 ---- : [Auto]
Command Rate (CMD) 0 ---- : [Auto]
Channel A Timing Settings -- {Press Enter to change settings}
Static tRead Value ------------- : 6 [8]
tRD Phase0 Adjustment ---------- : 0 [Auto]
tRD Phase1 Adjustment ---------- : 0 [Auto]
tRD Phase2 Adjustment ---------- : 0 [Auto]
tRD Phase3 Adjustment ---------- : 0 [Auto]
Trd2rd(Different Rank) -------- : 8 [Auto]
Twr2wr(Different Rank) -------- : 8 [Auto]
Twr2rd(Different Rank) --------- : 7 [Auto]
Trd2wr(Same/Diff Rank) ------- : 9 [Auto]
Dimm1 Clock Skew Control ----- : [Auto]
Dimm2 Clock Skew Control ----- : [Auto]
DDR Write Training ------------ : [Auto]
Channel B Timing Settings -- {Press Enter to change settings}
Static tRead Value ------------- : 6 [8]
tRD Phase0 Adjustment ---------- : 0 [Auto]
tRD Phase1 Adjustment ---------- : 0 [Auto]
tRD Phase2 Adjustment ---------- : 0 [Auto]
tRD Phase3 Adjustment ---------- : 0 [Auto]
Trd2rd(Different Rank) -------- : 8 [Auto]
Twr2wr(Different Rank) -------- : 8 [Auto]
Twr2rd(Different Rank) --------- : 7 [Auto]
Trd2wr(Same/Diff Rank) ------- : 9 [Auto]
Dimm1 Clock Skew Control ----- : [Auto]
Dimm2 Clock Skew Control ----- : [Auto]
DDR Write Training ------------ : [Auto]
Motherboard Voltage Control
CPU Voltage Types--------- Normal ----- Current -----
CPU Vcore ----------- 1.20000V -- : [Auto]
CPU Termination ----- 1.200V -- : [Auto]
CPU Reference ------- 0.805V -- : [Auto]
MCH Core ------------- 1.100V -- : [1.200]
DRAM Voltage --------- 1.800V -- : [2.000V]
Advanced Settings
Limit CPUID Max. to 3 ---------- : [Disabled]
No-Execute Memory Protect ------ : [Enabled]
CPU Enhanced Halt (C1E) -------- : [Disabled]
C2/C2E State Support ----------- : [Disabled]
x C4/C4E State Support --------- : [Disabled]
CPU Thermal Monitor 2 (TM2) ---- : [Enabled]
CPU EIST Function ------------- : [Disabled]
Virtualization Technology ------ : [Disabled]
Integrated Peripherals
USB Storage Function ----- : [Enabled]
Comment