Tweet
My version of mobo is z97x ud3h bk rev 1.1 but I think I flashed 1.2 using the @Bios program and now my mobo doesn't boot, fans and USB are working but that's all...
-
Last edited by Ponlas; 09-10-2015, 11:44 AM. -
Re: Flashed wrong bios; doesn't boot
BIOS for Version 1.1 & 1.2 is same.
Did @BIOS finished flashing?
Try to clear CMOS.
or
kick up Backup BIOS. -
Re: Flashed wrong bios; doesn't boot
It finished flashing and told me to restart.. I cleared cmos but it didn't help and I tried to short pin 5-6 on M bios and now it's stuck on boot loop without getting into bios screen. What do I do?Originally posted by stasio View PostComment
-
Re: Flashed wrong bios; doesn't boot
Kick up Backup BIOS.....DON'T short pins !!
(1) The PC has to be off.
(2) Press and hold down the power button. Don't let go.
(3) The PC will turn on. A few seconds later, the PC will turn off again by itself.
(4) Let go of the power button at this point.
Next start, the backup BIOS will take over.Comment
-
Re: Flashed wrong bios; doesn't boot
I did that method too but it is still stuck in the boot loop. Doesn't get into BIOS screen at all.Originally posted by stasio View PostComment
-
Re: Flashed wrong bios; doesn't boot
Did you hold the power button until the computer shut down (after it turned on)?Originally posted by Ponlas View PostComment
-
Re: Flashed wrong bios; doesn't boot
Yup, did the whole process more than once and still it reboots.. However if I hold the power button until it shuts down it will stop rebooting unless I turn it on again.Originally posted by Chike View PostComment
Comment