My version of mobo is z97x ud3h bk rev 1.1 but I think I flashed 1.2 using the @Bios program and now my mobo doesn't boot, fans and USB are working but that's all...
Announcement
Collapse
No announcement yet.
Flashed wrong bios; doesn't boot
Collapse
X
-
Re: Flashed wrong bios; doesn't boot
Originally posted by stasio View PostBIOS for Version 1.1 & 1.2 is same.
Did @BIOS finished flashing?
Try to clear CMOS.
or
kick up Backup BIOS.
Comment
-
Re: Flashed wrong bios; doesn't boot
Kick up Backup BIOS.....DON'T short pins !!
(1) The PC has to be off.
(2) Press and hold down the power button. Don't let go.
(3) The PC will turn on. A few seconds later, the PC will turn off again by itself.
(4) Let go of the power button at this point.
Next start, the backup BIOS will take over.
Comment
-
Re: Flashed wrong bios; doesn't boot
Originally posted by stasio View PostKick up Backup BIOS.....DON'T short pins !!
(1) The PC has to be off.
(2) Press and hold down the power button. Don't let go.
(3) The PC will turn on. A few seconds later, the PC will turn off again by itself.
(4) Let go of the power button at this point.
Next start, the backup BIOS will take over.
Comment
-
-
Re: Flashed wrong bios; doesn't boot
Originally posted by Chike View PostDid you hold the power button until the computer shut down (after it turned on)?
Comment
Comment