Hello guys, I apologize in advance for my poor English , verily, I am using goole translate .
Here is my configuration :
z87x - ud4h (gigabytes ) { f3 bios , setting defoult . rev 1.0 };
i5 4670k ;
gigabyte r9 270x;
ddr3 2400 x tested speed trindet CL10 -12-12-31 1.65v ;
xfx 750w core edtion ;
ls 120gb ssd corsair force ;
cooler master K380 ;
But let's get down to it, unfortunately my new build will not start when cold ( cold boot ) ;
If I turn on and turn off the computer over an hour and a half , no problem, but after several hours takes a system startup (including sounds of windows ), but no video signal , the debug LED dispaly shows A0 ( as when the signal arrives and the coold boot does not occur ) .
Sometimes I noticed that after a couple of hours off once you turn the video signal arrived late , when the os was already loaded .
In short , my build will not start cold , debug LED shows no errors such as " 97 ", but the video signal does not arrive.
Sorry for the bad English, hello from italy ...
byez
Here is my configuration :
z87x - ud4h (gigabytes ) { f3 bios , setting defoult . rev 1.0 };
i5 4670k ;
gigabyte r9 270x;
ddr3 2400 x tested speed trindet CL10 -12-12-31 1.65v ;
xfx 750w core edtion ;
ls 120gb ssd corsair force ;
cooler master K380 ;
But let's get down to it, unfortunately my new build will not start when cold ( cold boot ) ;
If I turn on and turn off the computer over an hour and a half , no problem, but after several hours takes a system startup (including sounds of windows ), but no video signal , the debug LED dispaly shows A0 ( as when the signal arrives and the coold boot does not occur ) .
Sometimes I noticed that after a couple of hours off once you turn the video signal arrived late , when the os was already loaded .
In short , my build will not start cold , debug LED shows no errors such as " 97 ", but the video signal does not arrive.
Sorry for the bad English, hello from italy ...
byez
Comment