Per this post, going to make a profile for this - http://forums.tweaktown.com/gigabyte...tml#post460711
Specs are
Motherboard: GA-Z87X-UD3H
CPU: i7-4770K (stock speeds)
RAM: 2x Corsiar PC3 4GB @ stock 800mhz
GFX: 2x EVGA GTX680 in SLI @ stock, not OC editions or anything.
HDD: 2x Corsair M4 128GB in stripe on Intel Controller.
Case: Dell XPS 730X
PS: Dell 1KW (From XPS 730X)
When running the F5 bios, I am 100% stable, but only with 2 sticks of RAM, fair enough, RAM may not be 100% compatible with Haswell. However when I run just the 2 sticks of ram and not 4 and upgrade to any F6 beta bios, I am experiencing issues once I am using the system for awhile, especially in 3D stuff like Battlefield 3, what will happen is, the system is fine, then suddenly the system/video/sound will start to freeze for 5 seconds at a time, then go back, then repeat constantly for about 30 seconds before it hard-locks. I've noticed while this happens the "System Interrupt" (DPC) process starts using 10% CPU usage, which it usually sits at 1% as far as I can tell.
Anyone else seeing this issue or have any recommendations.
The only difference in the system is F5 to F6 bios.
Specs are
Motherboard: GA-Z87X-UD3H
CPU: i7-4770K (stock speeds)
RAM: 2x Corsiar PC3 4GB @ stock 800mhz
GFX: 2x EVGA GTX680 in SLI @ stock, not OC editions or anything.
HDD: 2x Corsair M4 128GB in stripe on Intel Controller.
Case: Dell XPS 730X
PS: Dell 1KW (From XPS 730X)
When running the F5 bios, I am 100% stable, but only with 2 sticks of RAM, fair enough, RAM may not be 100% compatible with Haswell. However when I run just the 2 sticks of ram and not 4 and upgrade to any F6 beta bios, I am experiencing issues once I am using the system for awhile, especially in 3D stuff like Battlefield 3, what will happen is, the system is fine, then suddenly the system/video/sound will start to freeze for 5 seconds at a time, then go back, then repeat constantly for about 30 seconds before it hard-locks. I've noticed while this happens the "System Interrupt" (DPC) process starts using 10% CPU usage, which it usually sits at 1% as far as I can tell.
Anyone else seeing this issue or have any recommendations.
The only difference in the system is F5 to F6 bios.
Comment