Announcement

Collapse
No announcement yet.

Z68AP-D3 (2.0) reboots during windows install

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Z68AP-D3 (2.0) reboots during windows install

    Hello,
    Built a new system and experiencing random reboots during installation of windows 8. Tried Win xp and win 7 as well on different drives and same thing happens. The reboot seems to occur at the same point in the installation.All these versions of windows were purchased.

    Summary of tests carried out so far. During all the tests it still rebooted
    Setup is on a workbench not in a case and there are no connections to the power,reset header.(i short out power button pins to start)
    Tried 3 different SATA harddrives,and tried different SATA ports
    Replaced power supply with 750 watt PS
    Tried every memory port with one stick of Ram.
    Run 4 hour memtest on both memory ,checked out OK.
    Removed video card and ran onboard graphics with HDMI.
    Flashed bios to version FD, ran optimized defaults.
    Tried installing from USB and CD.
    Tried XMP profile1.
    Removed USB mouse
    Tried keyboard in USB and PS2 ports
    Reseated CPU and applied new thermal paste, (running with stock cooler)
    Bios reported 38 - 45 temp.

    Only odd thing is i removed a harddrive from a working PC that has WinXP installed and tried on the new build then booted into safe mode and it worked. left it over 4 hours and there were no reboots.
    Thanks for any help with this.
    Specs:
    Gigabyte Z68AP-D3 (ver 2.0)
    Intel core i5 2500K
    Corsair DDR3 CMZ8GX3M2A1600C9
    Sapphire HD3650 512mb video or Gigabyte 6770
    WD 320gb hardrive
    500watt Power supply
    Tags: None
  • #2
    Re: Z68AP-D3 (2.0) reboots during windows install

    When during the installation does it re-boot/fail?

    I had Win7 fail the installation on me during the "Updates" portion there you see the 5 steps of installation. My cause was a faulty motherboard.

    it would pass memtest for 24hrs and I was able to install uBuntu without any issues... but XP and Win7 would not install

    Vin
    Main Rig
    OS = Win10-64Bit
    CPU = Ryzen 1700x Overclocked to 4Ghz with custom water-cooling loop
    Mem = 16GB RAM @ 3200Mhz
    MB = Asus ROG C6H
    GPU = Asus 1080Ti ROG Strix
    HD = 512GB M.2 Samsung 960 Pro
    PSU = EVGA SuperNOVA 1300w
    Case = Cooler Master HAF-X 945

    HTPC / Home Server
    OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2012 Virtual Machine with 12GB ram assigned for homer server
    CPU = i7-980X @ 3.5Ghz CoolerMasster Hyper 212 Evo
    Mem = 24GB RAM
    MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios
    GPU = EVGA nVidia GT210
    HD = 2x PNY 120GB Raid 0 (OS)
    Storage = 8TB WD Black Storage
    PSU = Corsair TX750
    Case = Define R5

    Comment

    • #3
      Re: Z68AP-D3 (2.0) reboots during windows install

      On windows 7 install it gets past the updates,finishes installation continues the normal reboot to the enter PC name screen,then reboots again normally gets to the "configuring for first use screen" at this screen it reboots and comes back to the enter pc name screen.
      Win XP installation gets to the "installing services" then reboots.
      Windows 8 installation all i see is the windows logo then under the logo there is a 'rotating circle of dots' then reboots.
      Last edited by RayJ_19; 01-20-2013, 06:58 PM.

      Comment

      • #4
        Re: Z68AP-D3 (2.0) reboots during windows install

        I've had that happen with 2 (count 'em) ASR FM2A85X extreme6 boards. The last one had a bad DIMM socket as well.
        If it happens on the 3rd I'm going for a refund.
        Wish I could help but I gotta agree w/Vinster on this one.

        Comment

        • #5
          Re: Z68AP-D3 (2.0) reboots during windows install

          Thanks for the replys,
          Just tried 2 new 2x2gb OCZ Ram modules and get the same results.Talked to Gigabyte support and they said replace the DVD drive and power supply. The DVD SATA drive is new.Tried a different drive and power supply Still the same. Could this be a bad CPU, not sure what else to try.

          Comment

          • #6
            Re: Z68AP-D3 (2.0) reboots during windows install

            Intel has a test util on their site. It wouldn't hurt trying it . Of course you could pull the DVD & test it on a working system.
            I also got a neat little device that tests voltage output for every type of on your psu. I got one on eBay for I think $17. I have a feeling it doesn't test it under load though.

            It tastes like a bad board to me though.

            Comment

            • #7
              Re: Z68AP-D3 (2.0) reboots during windows install

              DVD works on another system Monitored 12V supply with multimeter and it was stable at 11.95v when it went into reboot. MB is looking like the problem,will try and return under warranty to Gigabyte.

              Comment

              • #8
                Re: Z68AP-D3 (2.0) reboots during windows install

                Originally posted by Mustash View Post
                Intel has a test util on their site. It wouldn't hurt trying it . Of course you could pull the DVD & test it on a working system.
                I also got a neat little device that tests voltage output for every type of on your psu. I got one on eBay for I think $17. I have a feeling it doesn't test it under load though.

                It tastes like a bad board to me though.
                that's just a voltage meter, if the PSU doesn't have the current to backup what is required your're still toast and that display would not give you a clue unfortunately.

                but from the first post you tried installing from a USB and tried a different PSU... I'd try a different board... if you think it may be a CPU and have a spare of anything you could try it... but I'm sticking with the board.

                Vin
                Main Rig
                OS = Win10-64Bit
                CPU = Ryzen 1700x Overclocked to 4Ghz with custom water-cooling loop
                Mem = 16GB RAM @ 3200Mhz
                MB = Asus ROG C6H
                GPU = Asus 1080Ti ROG Strix
                HD = 512GB M.2 Samsung 960 Pro
                PSU = EVGA SuperNOVA 1300w
                Case = Cooler Master HAF-X 945

                HTPC / Home Server
                OS = Win7 64Bit running XBMC HTPC Front end with Windows Server 2012 Virtual Machine with 12GB ram assigned for homer server
                CPU = i7-980X @ 3.5Ghz CoolerMasster Hyper 212 Evo
                Mem = 24GB RAM
                MB = Gigabyte GA-X58A-UD5 v1.0 with F6 Bios
                GPU = EVGA nVidia GT210
                HD = 2x PNY 120GB Raid 0 (OS)
                Storage = 8TB WD Black Storage
                PSU = Corsair TX750
                Case = Define R5

                Comment

                • #9
                  Re: Z68AP-D3 (2.0) reboots during windows install

                  Originally posted by RayJ_19 View Post
                  DVD works on another system Monitored 12V supply with multimeter and it was stable at 11.95v when it went into reboot. MB is looking like the problem,will try and return under warranty to Gigabyte.
                  I've always seen a 12 v rail at a little better than 12 v. Then you have your 5 & 3.3v all normally read a little higher. I'm not familiar w your board but I think you should be able to get a voltage reading when you're in BIOS UEFI setup.

                  Comment

                  Previous template Next
                  Working...
                  X