Time for me to upgrade ??

[lotsip]

Re: Time for me to upgrade ??

ok, putting thermal monitor and prochot back on...........

and back to retesting .06875 dvid, (make sure it still works at that).......before heading over to testing decreases in vtt.........

[lotsip]

Re: Time for me to upgrade ??

Who set this to 1.82v, you misteken it for PLL?

oh,,,,,,,,,,,i don't know, haha, let me check my notes...........see, you leave me alone for a few hours and I am dangerous.........lol, jking !!

[wazza300]

Re: Time for me to upgrade ??

you shouldnt really need to touch the other voltages imo,just cpu/qpi-vtt and dram,

[lotsip]

Re: Time for me to upgrade ??

ok, probably did confuse pch with pll..........pll default is 1.8, its set to auto now, dear lord...........so, make pll 1.82 and pch back to auto, normal, or a set value ?

[wazza300]

Re: Time for me to upgrade ??

auto should be fine,i never touched those for 4.2ghz

[Chike]

Re: Time for me to upgrade ??

PCH auto and PLL leave auto also if you have not chnaged it before. Check target of both in ET6 to be as default, or if not what their values.

[lotsip]

Re: Time for me to upgrade ??

ok putting both on auto now (just checked the mb manual, those are defaults).........

[wazza300]

Re: Time for me to upgrade ??

download aida64 and run some memory benchmarks,it will give you a good idea of the read/write figures,just click tools at the top then memory and cache benchmark

http://download.aida64.com/aida64extreme_build_1839_s1y6ftjhwk.zip

[lotsip]

Re: Time for me to upgrade ??

PCH auto and PLL leave auto also if you have not chnaged it before. Check target of both in ET6 to be as default, or if not what their values.

ok, will check et for targets on those now...........question though, now that we are on ET target..........i rarely change settings with ET (not sure i trust it), but, i do look at it often for readings....., and, i notice it shows target cpu vcore as 1.5125v..........whats UP with that......???

[lotsip]

Re: Time for me to upgrade ??

download aida64 and run some memory benchmarks,it will give you a good idea of the read/write figures,just click tools at the top then memory and cache benchmark

http://download.aida64.com/aida64extreme_build_1839_s1y6ftjhwk.zip

thanks wazza,,,,,,,will do that soon !

[Chike]

Re: Time for me to upgrade ??

Maybe it is somehow confused with the DVID, it that the latest for that board/CPU?

[Chike]

Re: Time for me to upgrade ??

No need to download AIDA, MaxxMEM is good enough.

[wazza300]

Re: Time for me to upgrade ??

yeah maxmem if you have it,as for easytune it should be fine to set voltages in there to test with,then if stable apply them to the bios,saves booting into bios each time to adjust voltages ect

[lotsip]

Re: Time for me to upgrade ??

i think i have the latest ET.....will check that when linx test of .06875 dvid is done

[lotsip]

Re: Time for me to upgrade ??

yeah maxmem if you have it,as for easytune it should be fine to set voltages in there to test with,then if stable apply them to the bios,saves booting into bios each time to adjust voltages ect

i've been told that a few times.......but, sometimes I need a good kick. ;)