Re: X58 UD7 and Corsair dominator GT
First lets try and get ram running at 1333 first. Try these settings.
Set uncore to 20x - 22x
bclk to 133
memory multi to 10x
memory timings 8-8-8-24.
set Vcore to normal.
qpi/vtt start with 1.225 and keep increasing slowly untill system starts or is stable. May need up to 1.3-1.4v.
vdimm set to 1.66
all other voltages can be left on auto for now.
To test for stablity use either linX 10-15 runs at max memory. Use Real temp or core temp to keep watch on your cpus core temps. Keep then at or below 80c.
First lets try and get ram running at 1333 first. Try these settings.
Set uncore to 20x - 22x
bclk to 133
memory multi to 10x
memory timings 8-8-8-24.
set Vcore to normal.
qpi/vtt start with 1.225 and keep increasing slowly untill system starts or is stable. May need up to 1.3-1.4v.
vdimm set to 1.66
all other voltages can be left on auto for now.
To test for stablity use either linX 10-15 runs at max memory. Use Real temp or core temp to keep watch on your cpus core temps. Keep then at or below 80c.
Comment