Hope someone can help,
I have a Gigabyte X58A-UD7 Rev 1 MB, Not sure of the Bios edition.
Problem is with or without mem I get a C1 error on the Post display, then it shuts down then powers up again for about couple of secs then shuts down again until I cycle power to it.
I have also tried with and with out the CPU.
Also can't get in to the bios as it never stays powered up. Have tried to reset by taking out the battery and using the reset buttons. I have tried holding the reset button down and it still restarts and the power button doesn't seem to do anything.
Would the MB restart and then shut off with bad mem? Shouldn't it at least stay powered on? Also it doesn't beep when powering up to show that it is going thru the POST sequence.
Thanks.
The list of Components are that I plugged in to test with are below. Also I have checked and the mem and cpu are listed as compatible.
I7 980 Xtreme
Gigabyte X58A-UD7 MB
G.Skill F3 16000CL9T Mem
EVGA GTX 480.
WD 1TB Sata6 HD
Any help would be appreciated
I have a Gigabyte X58A-UD7 Rev 1 MB, Not sure of the Bios edition.
Problem is with or without mem I get a C1 error on the Post display, then it shuts down then powers up again for about couple of secs then shuts down again until I cycle power to it.
I have also tried with and with out the CPU.
Also can't get in to the bios as it never stays powered up. Have tried to reset by taking out the battery and using the reset buttons. I have tried holding the reset button down and it still restarts and the power button doesn't seem to do anything.
Would the MB restart and then shut off with bad mem? Shouldn't it at least stay powered on? Also it doesn't beep when powering up to show that it is going thru the POST sequence.
Thanks.
The list of Components are that I plugged in to test with are below. Also I have checked and the mem and cpu are listed as compatible.
I7 980 Xtreme
Gigabyte X58A-UD7 MB
G.Skill F3 16000CL9T Mem
EVGA GTX 480.
WD 1TB Sata6 HD
Any help would be appreciated
Comment