Hi all,
My system now 24hr Prime stable. My purpose is to lower my Vcore and keep it stable @ 3.82GHz
Any ideas ?
My system
CPU: Q9550 [email protected] 57c@load
CPU Cooling: Scythe Yasya
Memory: G.Skill 2x2GB DDR2-1066 CL5
GPU: Sapphire Radeon 4870 512MB DDR5
MB: Gigabyte GA-EP45-UD3P rev 1.1 Bios ver F10
HDD: Samsung F3 1TB x2+Seagate ST3500320AS 500GB
PSU: SeaSonic M12II-620W Bronze
Case: TT Armor Plus MX
Display: Hanns-G HG281DPB 28"
OS: Windows 7 Ultimate 64bit
My system now 24hr Prime stable. My purpose is to lower my Vcore and keep it stable @ 3.82GHz
Any ideas ?
Code:
**MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............:[Auto] CPU Clock Ratio .......................:[8] Fine CPU Clock Ratio...................:[+0.5] CPU Frequency .........................:3.82GHz (450x8.5) **Clock Chip Control Standard Clock Control CPU Host Clock Control................: [Enabled] CPU Host Frequency (Mhz) .............: [450] PCI Express Frequency (Mhz) ..........: [100] C.I.A.2 ..............................: [Disabled] **Advanced Clock Control [Press Enter] CPU Clock Drive........................: [800mV] PCI Express Clock Drive................: [900mV] CPU Clock Skew (ps)....................: [0ps] MCH Clock Skew (ps)....................: [0ps] **DRAM Performance Control Performance Enhance....................: [STANDARD] Extreme Memory Profile (X.M.P.)........: [Disabled] (G)MCH Frequency Latch.................: [Auto] System Memory Multiplier ..............: [2.00D] Memory Frequency (Mhz) .....1066.......: [900] DRAM Timing Selectable ................: [Manual] **Standard Timing Control CAS Latency Time........................: [5] tRCD ...................................: [5] tRP'....................................: [5] tRAS....................................: [15] **Advanced Timing Control tRRD...................4....................: [3] tWTR...................4....................: [3] tWR....................8....................: [6] tRFC...................68...................: [52] tRTP...................4....................: [3] Command Rate (CMD) ....0....................: [Auto] **Channel A All Auto **Channel B All Auto **Motherboard Voltage Control CPU Load-Line Calibration.......................: [Enabled] CPU Vcore.............1.25000V..............: [1.38125V] CPU-Z: Idle 1.36v Load 1.344v-1.36v CPU Terminatio........1.200V................: [1.240V] CPU PLL...............1.500V................: [1.570V] CPU Reference.........0.760V................: [Auto] MCH/ICH MCH Core..............1.100V...............: [1.200V] MCH Reference.........0.760V...............: [Auto] MCH/DRAM Reference....0.900V...............: [Auto] ICH I/O...............1.500V...............: [1.570V] ICH Core..............1.100V...............: [1.200V] DRAM DRAM Voltage .........1.800V...............: [2.100V] DRAM Termination .....0.900V...............: [Auto] Channel A Reference ..0.900V...............: [Auto] Channel B Reference ..0.900V...............: [Auto] Advanced Settings Limit CPUID Max. to 3........................: [Disabled] No-Execute Memory Protect....................: [Disabled] CPU Enhanced Halt (C1E)......................: [Disabled] CPU Thermal Monitor 2(TM2) ..................: [Disabled] CPU EIST Function............................: [Disabled] Virtualization Technology....................: [Enabled]
My system
CPU: Q9550 [email protected] 57c@load
CPU Cooling: Scythe Yasya
Memory: G.Skill 2x2GB DDR2-1066 CL5
GPU: Sapphire Radeon 4870 512MB DDR5
MB: Gigabyte GA-EP45-UD3P rev 1.1 Bios ver F10
HDD: Samsung F3 1TB x2+Seagate ST3500320AS 500GB
PSU: SeaSonic M12II-620W Bronze
Case: TT Armor Plus MX
Display: Hanns-G HG281DPB 28"
OS: Windows 7 Ultimate 64bit
Comment