Hi all,
I recently upgraded to an i7 965 processor (an Intel engineering sample) and a Gigabyte EX58-UD5 board.
I've been having intermittent BSODs and reboots, always with error 124. System is used mainly for video encoding so it runs at full load most of the time - this 124 error comes up on average once a week.
Now I did migrate this hard drive across from my previous 965/Q6600 rig but I do not believe that to be the problem.
I've already swapped out the PSU for a 750w Corsair unit and changed the graphics card so I have ruled those out as causes.
Here's all the relevant information, I'd love some guidance!
This thing is causing me to pull out what hair I have left, if anybody can assist to eradicate this crashing you'd have my undying gratitude!
Thanks all!
I recently upgraded to an i7 965 processor (an Intel engineering sample) and a Gigabyte EX58-UD5 board.
I've been having intermittent BSODs and reboots, always with error 124. System is used mainly for video encoding so it runs at full load most of the time - this 124 error comes up on average once a week.
Now I did migrate this hard drive across from my previous 965/Q6600 rig but I do not believe that to be the problem.
I've already swapped out the PSU for a 750w Corsair unit and changed the graphics card so I have ruled those out as causes.
Here's all the relevant information, I'd love some guidance!
Code:
CPU = i7 965 ES Motherboard = EX58-UD5 rev 12 BIOS Version = F12 Ram = G. Skill F3-16000CL9-2GBTD Advanced CPU Features: CPU Clock Ratio ................................ [24x] Intel(R) Turbo Boost Tech .................. [Enabled] CPU Cores Enabled ............................ [All] CPU Multi Threading .......................... [Enabled] CPU Enhanced Halt (C1E) ................... [Enabled] C3/C6/C7 State Support .................... [Disabled] CPU Thermal Monitor ......................... [Enabled] CPU EIST Function ............................ [Enabled] Virtualization Technology ................... [Enabled] Bi-Directional PROCHOT ..................... [Enabled] Uncore & QPI Features: QPI Link Speed .............................. Auto Uncore Frequency .......................... Auto (2667MHz) Isonchronous Frequency ..................[Enabled] Standard Clock Control: Base Clock (BCLK) Control ................ [Disabled] BCLK Frequency (MHz) ..................... PCI Express Frequency (MHz) ........... Auto C.I.A.2 [Disabled] Advanced Clock Control: CPU Clock Drive ..............................[800mV] PCI Express Clock Drive ................... [900mV] CPU Clock Skew ............................. [0ps] IOH Clock Skew ............................. [0ps] Advanced DRAM Features: Performance Enhance ...................... [Standard] Extreme Memory Profile (X.M.P) ......... [Disabled] System Memory Multiplier (SPD) ........ [AUTO] DRAM Timing Selectable (SPD) .......... [AUTO] Channel A + B + C Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ...................... tRCD ....................................... tRP ......................................... tRAS ....................................... Advanced Voltage Control: CPU Load Line Calibration ................. [Disabled] CPU Vcore ............................... AUTO 1.275 QPI/VTT Voltage 1.150v ............ AUTO 1.175 CPU PLL 1.800v ....................... MCH/ICH PCIE 1.500v ........................... QPI PLL 1.100v ....................... IOH Core 1.100v ..................... AUTO 1.1 ICH I/O 1.500v ....................... ICH Core 1.1v ........................ DRAM DRAM Voltage 1.500v .............. AUTO 1.5 DRAM Termination 0.750v [AUTO] Ch-A Data VRef. 0.750v [AUTO] Ch-B Data VRef. 0.750v [AUTO] Ch-C Data VRef. 0.750v [AUTO] Ch-A Address VRef. 0.750v [AUTO] Ch-B Address VRef. 0.750v [AUTO] Ch-C Address VRef. 0.750v [AUTO]
Thanks all!
Comment