Raid 1 after OS is installed?

[bogster]

Re: Raid 1 after OS is installed?

Well he is a member here, and I am a member there, so I'll go over there and PM him and see if he will come give you some advice and or settings for that ram.

He's on X58 now though, but hopefully he will remember his settings.

*PM Sent!

Fantastic thank you very very much :).

[Lsdmeasap]

Re: Raid 1 after OS is installed?

Anytime! Hopefully he can help you get things going a little bit smoother!

Hope he remembers his settings :)

[andressergio]

Re: Raid 1 after OS is installed?

Current bios settings below:

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 8x
Fine CPU Clock Ratio.....................: +0.0
CPU Frequency ...........................: 2.66 (333x8)
 
 
Clock Chip Control 
Standard Clock Control
CPU Host Clock Control..................: Disabled
CPU Host Frequency (Mhz) ............: 333 Mhz
PCI Express Frequency (Mhz) .........: 100
 
C.I.A.2 .................................:Disabled
 
 
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800
PCI Express Clock Drive.................: 900
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)...................: 0ps
 
 
DRAM Performance Control
Performance Enhance...................: Standard
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............: 4.00D
Memory Frequency (Mhz) ..............: 1,333
DRAM Timing Selectable ................: Manual
 
Standard Timing Control
CAS Latency Time........................: 9
tRCD .........................................: 9
tRP'...........................................: 9
tRAS..........................................: 24
 
 
Advanced Timing Control
tRRD........................................... 4 Auto
tWTR.......................................... 5 Auto
tWR............................................ 10 Auto
tRFC........................................... 74 Auto
tRTP........................................... 5 Auto
Command Rate (CMD) ....................: 0 Auto
 
Driving Strength Profiles
Driving Strength ............................
 
Channel A
Static tRead Value.........................:8
 tRD Phase0 Adjustment...................:0 Auto
tRD Phase1 Adjustment...................:0 Auto
 tRD Phase2 Adjustment .................:0 Auto
 tRD Phase3 Adjustment..................: 0 Auto
Trd2rd(Different Rank)....................: 8 Auto 
Twr2wr(Different Rank)...................: 8 Auto 
Twr2rd(Different Rank)...................: 7 Auto 
Trd2wr(Same/Diff Rank)..................: 9 Auto 
Dimm1 Clock Skew Control...............: Auto
Dimm2 Clock Skew Control...............: Auto
 
Channel B
Static tRead Value.........................: 8
 tRD Phase0 Adjustment...................:0 Auto
tRD Phase1 Adjustment...................:0 Auto
 tRD Phase2 Adjustment .................:0 Auto
 tRD Phase3 Adjustment..................: 0 Auto
Trd2rd(Different Rank)....................: 8 Auto 
Twr2wr(Different Rank)...................: 8 Auto 
Twr2rd(Different Rank)...................: 7 Auto 
Trd2wr(Same/Diff Rank)..................: 9 Auto 
Dimm1 Clock Skew Control...............: Auto
Dimm2 Clock Skew Control...............: Auto
 
Motherboard Voltage Control
 
CPU
Line Load Calibration: Disabled
CPU Vcore?.???.........................: 1.27500v
 
CPU Termination?.....: 1.220v
 
CPU PLL???????....1.500V Auto.
 
CPU Referen.????....0.760V Auto.
 
CPU Reference2???,: Not Present.
 
MCH/ICH
MCH Core?????.....Auto
MCH Reference?.??.0.760V
MCH/DRAM Ref.?......0.750V
ICH I/O??????.....1.500V
ICH Core????...??1.100V
 
DRAM
DRAM Voltage ??....1.350V
DRAM Termination .?0.750V Auto.
Channel A Reference .?0.750V Auto.
Channel B Reference .?0.750V Auto.
 
Advanced Settings
Limit CPUID Max. to 3.....................: Disabled
No-Execute Memory Protect............: Enabled
CPU Enhanced Halt (C1E)................: Enabled
C2/C2E State Support....................: Not Present.
x C4/C4E State Support..................: Not Present.
CPU Thermal Monitor 2(TM2) ...........: Enabled
CPU EIST Function.........................: Enabled
Virtualization Technology................: Enabled
 
Integrated Peripherals
Legacy USB Storage Detect ..............Disabled

sup mate !

Ok will give you a hand here, ldsmeasap told me that you have troubles with ECO DDR3, ok those will do as expected 1600 on 7-8-7-24 at trd 8 and you have to give them some volts like 1,72 on BIOS, will not harm i took mine to 1,76 :)

See you are on a 9450 wich forces MCH a lot and so DDR3 and you are using so tiny volts, you need at least 1,46MCH !!!, i use 1,52 for my hypers at 1600 CL6 with my X3380 at 4500

also use skews of 900/900/0/50

and for VTT set it at 1,2 and put CPUREF at 0.785 and MCH ref at 0.80MCH then up vtt at the value you want 1,3++ for sure---

PCIe leave it at 101

and notch vcore

i been through the same reboots after passing LINX lol, and it was MCH...

try it you will be fine

Keep posting

Cheers !
Sergio

[andressergio]

Re: Raid 1 after OS is installed?

Anytime! Hopefully he can help you get things going a little bit smoother!

Hope he remembers his settings :)

yeah i do remember all i think i will for all my life and also i have ALL documented so anything you guys need i will have it since my first UD3P 1.0 and now on EP45T USB3P and still didnt build my I7 rig waiting the gtx's 460 :)

cheers all

have fun and don't suffer on OC ;)

Sergio

[bogster]

Re: Raid 1 after OS is installed?

sup mate !

Ok will give you a hand here, ldsmeasap told me that you have troubles with ECO DDR3, ok those will do as expected 1600 on 7-8-7-24 at trd 8 and you have to give them some volts like 1,72 on BIOS, will not harm i took mine to 1,76 :)

See you are on a 9450 wich forces MCH a lot and so DDR3 and you are using so tiny volts, you need at least 1,46MCH !!!, i use 1,52 for my hypers at 1600 CL6 with my X3380 at 4500

also use skews of 900/900/0/50

and for VTT set it at 1,2 and put CPUREF at 0.785 and MCH ref at 0.80MCH then up vtt at the value you want 1,3++ for sure---

PCIe leave it at 101

and notch vcore

i been through the same reboots after passing LINX lol, and it was MCH...

try it you will be fine

Keep posting

Cheers !
Sergio

Hi Sergio, nice to meet you. :)
Lsdmeasap has been helping me tweak my troublesome motherboard and ram combination.
But we cannot seem to get it stable.

I am having difficulty understanding your instructions Sergio, below is what i think i understand so far, correct me if i'm wrong (Lsdmeasap feel free to interject):

Memory Frequency (Mhz) ..............: 1,333 >> 1,600

Standard Timing Control
CAS Latency Time........................: 9 >> 07
tRCD .........................................: 9 >> 08
tRP'...........................................: 9 >> 7
tRAS..........................................: 24 >> 24

CPU Referen.????....0.760V Auto. >> 0.785

MCH/ICH
MCH Core?????.....Auto >> 1.46
MCH Reference?.??.0.760V >> 1.80
MCH/DRAM Ref.?......0.750V
ICH I/O??????.....1.500V
ICH Core????...??1.100V

DRAM
DRAM Voltage ??....1.350V >> 1.72
DRAM Termination .?0.750V Auto.
Channel A Reference .?0.750V Auto.
Channel B Reference .?0.750V Auto.


And here is what i didnt understand:

[andressergio]

Re: Raid 1 after OS is installed?

Hi Sergio, nice to meet you. :)
Lsdmeasap has been helping me tweak my troublesome motherboard and ram combination.
But we cannot seem to get it stable.

I am having difficulty understanding your instructions Sergio, below is what i think i understand so far, correct me if i'm wrong (Lsdmeasap feel free to interject):

Thanks for Your Patience.
T.

Hey there ! no problems lets go slow, keep in mind ECOS will never boot at 1,35 rated on the EP45T as its DDR3 designed for newer chipsets, so we need to tweak ;)

Tell me what speed are you runing ? and its a Q9450 right ? ge me on my msn: [email protected]

Cheers
Sergio

[bogster]

Re: Raid 1 after OS is installed?

Hey there ! no problems lets go slow, keep in mind ECOS will never boot at 1,35 rated on the EP45T as its DDR3 designed for newer chipsets, so we need to tweak ;)

Tell me what speed are you runing ? and its a Q9450 right ? ge me on my msn: [email protected]

Cheers
Sergio

Hi Sergio,
Yes it is a Q9450 @ 2.66 on FSB 1,333.
I will msn you when i am not working, will be in a day or so.

Speak soon,
T.

[andressergio]

Re: Raid 1 after OS is installed?

Hi Sergio,
Yes it is a Q9450 @ 2.66 on FSB 1,333.
I will msn you when i am not working, will be in a day or so.

Speak soon,
T.

ok mate i wait for ya. easier for me to help on msn

cheers all
Sergio

[Lsdmeasap]

Re: Raid 1 after OS is installed?

Thanks for stopping in Sergio!

[andressergio]

Re: Raid 1 after OS is installed?

Thanks for stopping in Sergio!

pleased to mate still waiting for him to catch me on msn

he has very low volts overall

cheers mate !
Sergio

[bogster]

Re: Raid 1 after OS is installed?

pleased to mate still waiting for him to catch me on msn

he has very low volts overall

cheers mate !
Sergio

Hi Lsdmeasap,
Here is the latest.
I have been on MSN with Sergio, who is a very nice fellow indeed.
He has helped me get my CPU upto 3.2, with the all the associated tweaks!
Have passed Linx on this also, so all seems good right now.

Thanks again Lsdmeasap, I have learned form you both,
and more importantly, my PC is working lol!
Just need to see how it runs over time, maybe a week or more of normal use, to be sure its stable.

Will report back soon.

Thanks guys :)

[andressergio]

Re: Raid 1 after OS is installed?

Hi Lsdmeasap,
Here is the latest.
I have been on MSN with Sergio, who is a very nice fellow indeed.
He has helped me get my CPU upto 3.2, with the all the associated tweaks!
Have passed Linx on this also, so all seems good right now.

Thanks again Lsdmeasap, I have learned form you both,
and more importantly, my PC is working lol!
Just need to see how it runs over time, maybe a week or more of normal use, to be sure its stable.

Will report back soon.

Thanks guys :)

thanks for ya word mate i'm glad to help

cheers !!!
Sergio

[Lsdmeasap]

Re: Raid 1 after OS is installed?

Great to hear things are moving along now! Thanks Sergio!!!

Once you get settle in please post me your final BIOS settings so I can see where my suggestions were off for future reference, thanks!

[bogster]

Re: Raid 1 after OS is installed?

Great to hear things are moving along now! Thanks Sergio!!!

Once you get settle in please post me your final BIOS settings so I can see where my suggestions were off for future reference, thanks!

Sure thing, that is my intention, just making sure it is stable over a long period of time first,
then will report back .
Been struggling without Internet for the past day or so, it keeps going down for hours at a time .

(Sergio, will catch you on MSN soon mate)