Tweet
Re: I860 on GA-P55A-UD7 max temp
Ohh, wow that is big, but you say it doesn't move much air? If not ya, go ahead and find a better one to replace it.
You need to set LLC to Level 1 to lessen the Vdrop/Vdroop, by the way what you mention is vdrop not vdroop. Vdroop is the difference between what you get at idle and load.
Also try several settings, some have more/less than others, like 1.3 may droop bad but 1.295 or 1.3125 may not so much
Ohh, wow that is big, but you say it doesn't move much air? If not ya, go ahead and find a better one to replace it.
You need to set LLC to Level 1 to lessen the Vdrop/Vdroop, by the way what you mention is vdrop not vdroop. Vdroop is the difference between what you get at idle and load.
Also try several settings, some have more/less than others, like 1.3 may droop bad but 1.295 or 1.3125 may not so much
Comment