Re: GA-X58A-UD7 - n00b OC settings
Announcement
Collapse
No announcement yet.
GA-X58A-UD7 - n00b OC settings
Collapse
X
-
GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
-
Re: GA-X58A-UD7 - n00b OC settings
so.. 1.25.. could try 1.22... anywhere else where i could tighten up?GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
now running with 1.225 vcoreGA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
you might need less qpi voltage with 9-9-9-24 timings so you could try and lower one click at a timeGigabyte ex58-ud5 f12 bios
Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
Thermolab Baram cpu cooler
Dual Boot
1xsamsung 750gb hard drive-win7 ultimate 64
1xsamsung 750gb hard drive-windows xp pro 32
Ati x1950 pro gpu
Logitech X-530 5.1 Speakers
1050w psu
Nzxt lexa case
http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
so i should try 8-8-8-24-2T then...??GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
i dont know,memory doesnt overclock very high or with tighter timings,they test each module at the factory and bin them close to what there specced at,you could try though also you might need slightly more qpi voltage with cas 8 timings,Gigabyte ex58-ud5 f12 bios
Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
Thermolab Baram cpu cooler
Dual Boot
1xsamsung 750gb hard drive-win7 ultimate 64
1xsamsung 750gb hard drive-windows xp pro 32
Ati x1950 pro gpu
Logitech X-530 5.1 Speakers
1050w psu
Nzxt lexa case
http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
yeah, i'll keep the memory at spec, at least i know it works at that rate. i'll down tune the qpi though..GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
you wont notice any difference in cas 8 or cas9Gigabyte ex58-ud5 f12 bios
Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
Thermolab Baram cpu cooler
Dual Boot
1xsamsung 750gb hard drive-win7 ultimate 64
1xsamsung 750gb hard drive-windows xp pro 32
Ati x1950 pro gpu
Logitech X-530 5.1 Speakers
1050w psu
Nzxt lexa case
http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
oh ok :).. so i made a good choice to go for 1866 spec'd memory instead of CAS8 then...GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
so i guess the trick here is to get to 4G+ without flying my chipGA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
what are you at now? 4ghz? n yh 1866mhz is plenty,i like to sit at 3.8ghz so i can use all my ram speed 1800mhz any higher and i have to underclock the ram alot,did you set your ram with 1t command rate or 2T?? 1T would be betterGigabyte ex58-ud5 f12 bios
Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
Thermolab Baram cpu cooler
Dual Boot
1xsamsung 750gb hard drive-win7 ultimate 64
1xsamsung 750gb hard drive-windows xp pro 32
Ati x1950 pro gpu
Logitech X-530 5.1 Speakers
1050w psu
Nzxt lexa case
http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
2 at the moment, i'll try lowing the vcore some more and change the ram to 1T...
CPU-Z Validator 3.1GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
got vcore to 1.225 and Command Rate to 1T.. so now 9-9-9-24-1T.. qpi is still 1.34..
btw.. why does DRAM Voltage have to be at 1.66V?GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
theres no 1.65 in the bios options,its just the way gigabyte label it,it actually uses 1.65 in windows which is what most ram is rated at.qpi v is about right with that speed ram and cpu clock,you could try for lower but you might get blue screens idkGigabyte ex58-ud5 f12 bios
Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
Thermolab Baram cpu cooler
Dual Boot
1xsamsung 750gb hard drive-win7 ultimate 64
1xsamsung 750gb hard drive-windows xp pro 32
Ati x1950 pro gpu
Logitech X-530 5.1 Speakers
1050w psu
Nzxt lexa case
http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template
Comment
-
Re: GA-X58A-UD7 - n00b OC settings
just got bsod 124.. so will have to up...GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
6GB Corsair Dominator 1866 @ 1600 ([email protected])
CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669
Comment
Comment