Re: Ga-890gpa-ud3h o/c
I am not sure the SB850 offers ACC.
If your bios does not have (ACC) Advanced Clock Calibration then you can't.
You may want to check your hidden bios feature by pressing CTRL+F1 on the main bios page or first page. Then navigate to MB Intelligent Tweaker(M.I.T.)
Here is a bios image of the MB Intelligent Tweaker(M.I.T.) on a GA-MA790GPT-UD3H which has the SB750. It offers the (ACC)
Just set the EC Firmware to Hybrid
MORE RESEARCH NEEDED
OCWorkbench
How do I unlock ?
If your bios does not have (ACC) Advanced Clock Calibration then you can't.
You may want to check your hidden bios feature by pressing CTRL+F1 on the main bios page or first page. Then navigate to MB Intelligent Tweaker(M.I.T.)
Here is a bios image of the MB Intelligent Tweaker(M.I.T.) on a GA-MA790GPT-UD3H which has the SB750. It offers the (ACC)
Code:
MB Intelligent Tweaker(M.I.T.) } Advanced Clock Calibration [Press Enter] CPU Clock Ratio [Auto] 2800Mhz CPU NorthBridge Freq. [Auto] 2000Mhz CPU Host Clock Control [Auto] x CPU Frequency(MHz) 200 PCIE Clock(MHz) [Auto] HT Link Width [Auto] HT Link Frequency [Auto] 2000Mhz VGA Core Clock control [Disabled] x VGA Core Clock(MHz) 700 Set Memory Clock [Auto] x Memory Clock x6.66 1333Mhz } DRAM Configuration [Press Enter] ******** System Voltage Optimized ******** System Voltage Control [Manual] DDR3 Voltage Control [Normal] NorthBridge Volt Control [Normal] SouthBridge Volt Control [Normal] SidePort Mem Volt Control [Normal] CPU NB VID Control [Normal] CPU Voltage Control [Normal] Normal CPU Vcore 1.3250V
Code:
Advanced Clock Calibration EC Firmware Selection [[COLOR="darkred"]Hybrid[/COLOR]l] Advanced Clock Calibration [[COLOR="darkred"]Enabled[/COLOR]] x Value (All Cores) -2% x Value (Core 0) -2% x Value (Core 1) -2% x Value (Core 2) -2% x Value (Core 3) -2%
EC Firmware Selection
Allows you to select the EC firmware version when Advanced Clock Calibration is enabled. After the selection, select Save & Exit Setup in the BIOS Main Menu and then press <Y>. A message which says "BIOS Is Updating EC Firmware!!! Don't Turn Off Or Reset System" will appear. Wait for a few seconds and the system will automatically restart for the settings to take effect.
Normal Uses the standard AMD EC firmware version. (Default)
Hybrid Uses the specific AMD EC firmware version. Advanced Clock Calibration
Allows you to determine whether to enable Advanced Clock Calibration when using an AMD Black Edition CPU.
Disabled Disables this function. (Default)
Auto Lets the BIOS to configure the settings to defaults.
All Cores Configures Advanced Clock Calibration for all CPU cores.
Per Core Individually configures Advanced Clock Calibration for each CPU core. Value (All Cores)
This option is configurable only when Advanced Clock Calibration is set to All Cores.
Options are: -12%~+12%. Value (Core 0), Value (Core 1), Value (Core 2), Value (Core 3)
This option is configurable only when Advanced Clock Calibration is set to All Cores.
Options are: -12%~+12%.
Allows you to select the EC firmware version when Advanced Clock Calibration is enabled. After the selection, select Save & Exit Setup in the BIOS Main Menu and then press <Y>. A message which says "BIOS Is Updating EC Firmware!!! Don't Turn Off Or Reset System" will appear. Wait for a few seconds and the system will automatically restart for the settings to take effect.
Normal Uses the standard AMD EC firmware version. (Default)
Hybrid Uses the specific AMD EC firmware version. Advanced Clock Calibration
Allows you to determine whether to enable Advanced Clock Calibration when using an AMD Black Edition CPU.
Disabled Disables this function. (Default)
Auto Lets the BIOS to configure the settings to defaults.
All Cores Configures Advanced Clock Calibration for all CPU cores.
Per Core Individually configures Advanced Clock Calibration for each CPU core. Value (All Cores)
This option is configurable only when Advanced Clock Calibration is set to All Cores.
Options are: -12%~+12%. Value (Core 0), Value (Core 1), Value (Core 2), Value (Core 3)
This option is configurable only when Advanced Clock Calibration is set to All Cores.
Options are: -12%~+12%.
OCWorkbench
Comment