Re: No luck OC'ing EP45-UD3R w/ E6550
Oops yes, CPU Host Frequency is 333 and I set CPU PLL to 1.500v.
One question I have is when I select the System Memory Multiplier the right side of the screen says:
x.xxA -> FSB 266MHz
x.xxB -> FSB 333MHz
x.xxC -> FSB 200MHz
x.xxD -> FSB 400MHz
Can someone clarify what this means? Are these requirements or just a guide?
I set the CPU Host Freq to 350, which raised my ram to 1120 so I changed the Memory Multiplier to 2.66D. This put the memory frequency to 993 instead of 1066.
System booted into Windows at 2.45GHz.
Oops yes, CPU Host Frequency is 333 and I set CPU PLL to 1.500v.
One question I have is when I select the System Memory Multiplier the right side of the screen says:
x.xxA -> FSB 266MHz
x.xxB -> FSB 333MHz
x.xxC -> FSB 200MHz
x.xxD -> FSB 400MHz
Can someone clarify what this means? Are these requirements or just a guide?
I set the CPU Host Freq to 350, which raised my ram to 1120 so I changed the Memory Multiplier to 2.66D. This put the memory frequency to 993 instead of 1066.
System booted into Windows at 2.45GHz.
Comment