Tweet
Re: Trying to get stable with a new OS[W7x64Pro]
"Was the stutter issue in the game solved?"
Have not played any games yet, so I don't know?
"It is quite interesting you had to change CPU Reference and by that much. Usually it is the MCH Reference that need adjustment, CPU Reference at higher speeds."
I don't know. In XP32, could use 1.34975, VTT1.28, CpuRef.760=.810 and pass P95 and IBT with slightly tighter settings then Jedec@533. Never had to adjust MCHRef on the XP OS. Though in XP my MCHRef was 1.28, but I've lowered that. Think I should lower it to 1.24 for these new modules?
"So maybe it is worth trying a step down MCH Reference if the stutter problem still persists and see if it is solved."
I will try MCH1.24 than play some BF2:PR.
I've tightened up the memory to Jedec#0@400MHz, but have the voltage at 1.9VDRAM-
Going to save Jedec#0,400MHz and MCH1.24 to BIOS, than play some games and let you know about noticed jiter and/or crash/c2d/BSOD that may occur!
Screens and setting-
Changing BIOS to-
"Was the stutter issue in the game solved?"
Have not played any games yet, so I don't know?
"It is quite interesting you had to change CPU Reference and by that much. Usually it is the MCH Reference that need adjustment, CPU Reference at higher speeds."
I don't know. In XP32, could use 1.34975, VTT1.28, CpuRef.760=.810 and pass P95 and IBT with slightly tighter settings then Jedec@533. Never had to adjust MCHRef on the XP OS. Though in XP my MCHRef was 1.28, but I've lowered that. Think I should lower it to 1.24 for these new modules?
"So maybe it is worth trying a step down MCH Reference if the stutter problem still persists and see if it is solved."
I will try MCH1.24 than play some BF2:PR.
I've tightened up the memory to Jedec#0@400MHz, but have the voltage at 1.9VDRAM-
Going to save Jedec#0,400MHz and MCH1.24 to BIOS, than play some games and let you know about noticed jiter and/or crash/c2d/BSOD that may occur!
Screens and setting-
Changing BIOS to-
Code:
Robust Graphics Booster ---------------- : [fast] CPU Clock Ratio ------------------------ : [9] Fine CPU Clock Ratio ------------------- : [NA] CPU Frequency ---------------------------: 3825 Clock Chip Control Standard Clock Control CPU Host Clock Control ----------------- : [Enabled] CPU Host Frequency (Mhz) ----------------: [425] PCI Express Frequency (Mhz) ------------ : [100] C.I.A.2 -------------------------------- : [Disabled] Advanced Clock Control ------- [Press Enter] CPU Clock Drive ------------------------ : <<< 800 <<< from 700 PCI Express Clock Drive ---------------- : <<< 900 <<< from 700 CPU Clock Skew (ps) -------------------- : <<< MCH Clock Skew (ps) -------------------- : <<< DRAM Performance Control Performance Enhance -------------------- : [standard] Extreme Memory Profile --- (X.M.P.) ---- : [Disabled] (G)MCH Frequency Latch ----------------- : [Auto] System Memory Multiplier --------------- : [2.00D] 1:1 ratio Memory Frequency (Mhz) ----------------- : [850] DRAM Timing Selectable ----------------- : [M] Standard Timing Control ---------------- : [B]Jedec#0,400MHz [/B] CAS Latency Time -------- ?? ----------- : [5] tRCD ------------------- ?? ----------- : [5] tRP --------------------- ?? ----------- : [5] tRAS ------------------- ?? ----------- : [[B]15[/B]] Jedec#0 value of 18 <<< Changed Advanced Timing Control tRRD ------------------- ?? ----------- : [[B]3[/B]] <<< value Jedec#0 tWTR ------------------- ?? ----------- : [Auto] tWR --------------------- ?? ----------- : [Auto] tRFC ------------------- ?? ----------- : [[B]51[/B]] <<< 56 to 51 value Jedec#0 tRTP ------------------- ?? ----------- : [[B]3[/B]] <<< value Jedec#0 Command Rate (CMD) --------------------- : [Auto] Driving Strength Profiles Driving Strength ----------------------- : 1066 Channel A Static tRead Value --------------------- : [[B]9[/B]] <<< Changed tRD Phase0 Adjustment ------------------ : [Auto] tRD Phase1 Adjustment ------------------ : [Auto] tRD Phase2 Adjustment ------------------ : [Auto] tRD Phase3 Adjustment ------------------ : [Auto] Trd2rd(Different Rank) ----------------- : [Auto] Twr2wr(Different Rank) ----------------- : [Auto] Twr2rd(Different Rank) ----------------- : [Auto] Trd2wr(Same/Diff Rank) ----------------- : [Auto] Dimm1 Clock Skew Control --------------- : [Auto] ps Dimm2 Clock Skew Control --------------- : [Auto] ps Channel B Static tRead Value --------------------- : [[B]9[/B]] <<< Changed tRD Phase0 Adjustment ------------------ : [Auto] tRD Phase1 Adjustment ------------------ : [Auto] tRD Phase2 Adjustment ------------------ : [Auto] tRD Phase3 Adjustment ------------------ : [Auto] Trd2rd(Different Rank) ----------------- : [Auto] Twr2wr(Different Rank) ----------------- : [Auto] Twr2rd(Different Rank) ----------------- : [Auto] Trd2wr(Same/Diff Rank) ----------------- : [Auto] Dimm1 Clock Skew Control --------------- : [Auto] ps Dimm2 Clock Skew Control --------------- : [Auto] ps Motherboard Voltage Control CPU Voltage Types------------ Normal --------- Current Load-Line Calibration ------------------ : [E] CPU Vcore ------------- "VID[1.25]" ---- : [1.33125] CPUID Vcore ---------------------------- : [1.312] CPU Termination --------- 1.200V* ------ : [1.28] CPU PLL ----------------- 1.500V* ------ : [1.5] CPU Reference ----------- 0.760V* ------ : [.830] .880 actual MCH/ICH MCH Core ---------------- 1.100V ------- : [[B]1.24[/B]] <<< Changed MCH Reference ----------- 0.760V ------- : [.760] .810 Actual MCH/DRAM Ref ------------ 0.900V ------ : [.950] ICH I/O ----------------- 1.500V ------- : [1.5] ICH Core ---------------- 1.100V ------- : [1.1] DRAM DRAM Voltage ------------ 1.800V ------- : [1.9] .1v above Jedec#3 @ 400MHz DRAM Termination -------- 0.900V ------- : [.950] Channel A Reference ----- 0.900V ------- : [.950] Channel B Reference ----- 0.900V ------- : [.950] Advanced Settings Limit CPUID Max. to 3 ------------------ : [Disabled] No-Execute Memory Protect -------------- : [Enabled] CPU Enhanced Halt (C1E) ---------------- : [Disabled] C2/C2E State Support ------------------- : [Disabled] x C4/C4E State Support ----------------- : [Disabled] CPU Thermal Monitor 2 (TM2) ------------ : [Enabled] CPU EIST Function --------------------- : [Disabled] Virtualization Technology -------------- : [Disabled] Integrated Peripherals Legacy USB Storage Detect ------------- : [Enabled]
Comment