Ok guys I've been doing a ton of research so far for the past few hours and have tried a bunch of options to still no avail. I will post up what I have and what I've done so far, hopefully someone can help me. I imagine I'm messing up my voltages, since thats what i've read so far. Just dont have the idea down on what voltages to tweak properly.
Any help is greatly appreciated, trying to simply get a stable 3.6 but maybe even a good 4ghz clock.
Motherboard: GA-EP45-UD3P v1.0 BIOS F12
Cpu: E8500 Wolfdale
Ram: G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (x2)
Newegg.com - G.SKILL PI Black 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL4D-4GBPI-B - Desktop Memory
Ram: CORSAIR XMS2 DOMINATOR 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
Newegg.com - CORSAIR XMS2 DOMINATOR 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model TWIN2X2048-6400C4D - Desktop Memory
TOTAL of 6GB of ram (dunno if this could be a problem
Power Supply Unit: Antec 550W
Video Card: Ati Radeon Diamond 4890 1GB
Windows 7
CPU cooler: ARCTIC COOLING Freezer 7 Pro Rev.2 92mm Fluid Dynamic CPU Cooler
Newegg.com - ARCTIC COOLING Freezer 7 Pro Rev.2 92mm Fluid Dynamic CPU Cooler - CPU Fans & Heatsinks
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster -------------- : [Auto]
CPU Clock Ratio ---------------------- : [9 X]
Fine CPU Clock Ratio ----------------- : [0.0]
CPU Frequency -------------------------: 3.6GHz (400x9)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control --------------- : [Enabled]
CPU Host Frequency (Mhz) --------------: [400]
PCI Express Frequency (Mhz) ---------- : [100]
C.I.A.2 ------------------------------ : [Disabled]
Advanced Clock Control ------- [Press Enter]
CPU Clock Drive ---------------------- : [800mV]
PCI Express Clock Drive -------------- : [900mV]
CPU Clock Skew (ps) ------------------ : [0ps]
MCH Clock Skew (ps) ------------------ : [0ps]
DRAM Performance Control
Performance Enhance ------------------- : [Standard]
Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
(G)MCH Frequency Latch ---------------- : [333Mhz]
System Memory Multiplier -------------- : [2.00B]
Memory Frequency (Mhz) ---------------- : [800]
DRAM Timing Selectable ---------------- : [Manual]
Standard Timing Control
CAS Latency Time -------- 5 --------- : [4]
tRCD ------------------- 5 ---------- : [4]
tRP --------------------- 5 ---------- : [4]
tRAS ------------------- 18 ----- ---- : [12]
Advanced Timing Control
tRRD ------------------- 3 ---------- : [Auto]
tWTR ------------------ 3 ---------- : [Auto]
tWR --------------------6 ---------- : [Auto]
tRFC ---------- --------52 ---------- : [Auto]
tRTP ------------------- 3 ---------- : [Auto]
Command Rate (CMD) ------0------------: [Auto]
Channel A
Static tRead Value ------------7--------- : [Auto]
tRD Phase0 Adjustment --------1--------- : [Auto]
tRD Phase1 Adjustment --------0--------- : [Auto]
tRD Phase2 Adjustment --------0--------- : [Auto]
tRD Phase3 Adjustment --------0--------- : [Auto]
Trd2rd(Different Rank) ---------6--------- : [Auto]
Twr2wr(Different Rank) --------6--------- : [Auto]
Twr2rd(Different Rank) --------5--------- : [Auto]
Trd2wr(Same/Diff Rank) -------8--------- : [Auto]
Dimm1 Clock Skew Control --------------- : [Auto]
Dimm2 Clock Skew Control --------------- : [Auto]
DDR Write Training -------------------------: [Auto]
Channel B
Static tRead Value ------------7--------- : [Auto]
tRD Phase0 Adjustment --------0--------- : [Auto]
tRD Phase1 Adjustment --------0--------- : [Auto]
tRD Phase2 Adjustment --------0--------- : [Auto]
tRD Phase3 Adjustment --------0--------- : [Auto]
Trd2rd(Different Rank) ---------6--------- : [Auto]
Twr2wr(Different Rank) --------6--------- : [Auto]
Twr2rd(Different Rank) --------5--------- : [Auto]
Trd2wr(Same/Diff Rank) -------8--------- : [Auto]
Dimm1 Clock Skew Control --------------- : [Auto]
Dimm2 Clock Skew Control --------------- : [Auto]
DDR Write Training-------------------------: [Auto]
Motherboard Voltage Control
CPU
Voltage Types------------ Normal --------- Current -----
Load-Line Calibration -------------------- : [Disabled]
CPU Vcore --------------- 1.22500V ----- : <--- Tried everything from 1.2-1.26, dunno if its alright to go higher, should this be 1.3?
CPU Termination --------- 1.200V* ------ : [Auto, tried 1.2]
CPU PLL ----------------- 1.500V* ------ : [Auto]
CPU Reference ----------- 0.760V* ------ : [Auto]
MCH/ICH
MCH Core ---------------- 1.100V ------- : [Auto]
MCH Reference ----------- 0.760V -------- : [Auto]
MCH/DRAM Ref ------------ 0.900V ------- : [Auto]
ICH I/O ----------------- 1.500V -------- : [Auto]
ICH Core ---------------- 1.100V -------- : [Auto]
DRAM
DRAM Voltage ------------ 1.800V ------- :<---- my ram is rated 1.8 and the other is rated at 2.1, so is this a problem here?
DRAM Termination -------- 0.900V ------- : [Auto]
Channel A Reference ----- 0.900V ------- : [Auto]
Channel B Reference ----- 0.900V ------- : [Auto]
Advanced Settings
Limit CPUID Max. to 3 ------------------ : [Disabled]
No-Execute Memory Protect -------------- : [Enabled]
CPU Enhanced Halt (C1E) ---------------- : [Disabled]
C2/C2E State Support ------------------- : [Disabled]
x C4/C4E State Support ----------------- : [Disabled]
CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
CPU EIST Function ---------------------- : [Disabled]
Virtualization Technology ---------------- : [Disabled]
Integrated Peripherals
Legacy USB Storage Detect -------------- : [Disabled]
OK thanks guys please let me know where I'm just not doing things right.
Any help is greatly appreciated, trying to simply get a stable 3.6 but maybe even a good 4ghz clock.
Motherboard: GA-EP45-UD3P v1.0 BIOS F12
Cpu: E8500 Wolfdale
Ram: G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (x2)
Newegg.com - G.SKILL PI Black 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL4D-4GBPI-B - Desktop Memory
Ram: CORSAIR XMS2 DOMINATOR 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
Newegg.com - CORSAIR XMS2 DOMINATOR 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model TWIN2X2048-6400C4D - Desktop Memory
TOTAL of 6GB of ram (dunno if this could be a problem
Power Supply Unit: Antec 550W
Video Card: Ati Radeon Diamond 4890 1GB
Windows 7
CPU cooler: ARCTIC COOLING Freezer 7 Pro Rev.2 92mm Fluid Dynamic CPU Cooler
Newegg.com - ARCTIC COOLING Freezer 7 Pro Rev.2 92mm Fluid Dynamic CPU Cooler - CPU Fans & Heatsinks
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster -------------- : [Auto]
CPU Clock Ratio ---------------------- : [9 X]
Fine CPU Clock Ratio ----------------- : [0.0]
CPU Frequency -------------------------: 3.6GHz (400x9)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control --------------- : [Enabled]
CPU Host Frequency (Mhz) --------------: [400]
PCI Express Frequency (Mhz) ---------- : [100]
C.I.A.2 ------------------------------ : [Disabled]
Advanced Clock Control ------- [Press Enter]
CPU Clock Drive ---------------------- : [800mV]
PCI Express Clock Drive -------------- : [900mV]
CPU Clock Skew (ps) ------------------ : [0ps]
MCH Clock Skew (ps) ------------------ : [0ps]
DRAM Performance Control
Performance Enhance ------------------- : [Standard]
Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
(G)MCH Frequency Latch ---------------- : [333Mhz]
System Memory Multiplier -------------- : [2.00B]
Memory Frequency (Mhz) ---------------- : [800]
DRAM Timing Selectable ---------------- : [Manual]
Standard Timing Control
CAS Latency Time -------- 5 --------- : [4]
tRCD ------------------- 5 ---------- : [4]
tRP --------------------- 5 ---------- : [4]
tRAS ------------------- 18 ----- ---- : [12]
Advanced Timing Control
tRRD ------------------- 3 ---------- : [Auto]
tWTR ------------------ 3 ---------- : [Auto]
tWR --------------------6 ---------- : [Auto]
tRFC ---------- --------52 ---------- : [Auto]
tRTP ------------------- 3 ---------- : [Auto]
Command Rate (CMD) ------0------------: [Auto]
Channel A
Static tRead Value ------------7--------- : [Auto]
tRD Phase0 Adjustment --------1--------- : [Auto]
tRD Phase1 Adjustment --------0--------- : [Auto]
tRD Phase2 Adjustment --------0--------- : [Auto]
tRD Phase3 Adjustment --------0--------- : [Auto]
Trd2rd(Different Rank) ---------6--------- : [Auto]
Twr2wr(Different Rank) --------6--------- : [Auto]
Twr2rd(Different Rank) --------5--------- : [Auto]
Trd2wr(Same/Diff Rank) -------8--------- : [Auto]
Dimm1 Clock Skew Control --------------- : [Auto]
Dimm2 Clock Skew Control --------------- : [Auto]
DDR Write Training -------------------------: [Auto]
Channel B
Static tRead Value ------------7--------- : [Auto]
tRD Phase0 Adjustment --------0--------- : [Auto]
tRD Phase1 Adjustment --------0--------- : [Auto]
tRD Phase2 Adjustment --------0--------- : [Auto]
tRD Phase3 Adjustment --------0--------- : [Auto]
Trd2rd(Different Rank) ---------6--------- : [Auto]
Twr2wr(Different Rank) --------6--------- : [Auto]
Twr2rd(Different Rank) --------5--------- : [Auto]
Trd2wr(Same/Diff Rank) -------8--------- : [Auto]
Dimm1 Clock Skew Control --------------- : [Auto]
Dimm2 Clock Skew Control --------------- : [Auto]
DDR Write Training-------------------------: [Auto]
Motherboard Voltage Control
CPU
Voltage Types------------ Normal --------- Current -----
Load-Line Calibration -------------------- : [Disabled]
CPU Vcore --------------- 1.22500V ----- : <--- Tried everything from 1.2-1.26, dunno if its alright to go higher, should this be 1.3?
CPU Termination --------- 1.200V* ------ : [Auto, tried 1.2]
CPU PLL ----------------- 1.500V* ------ : [Auto]
CPU Reference ----------- 0.760V* ------ : [Auto]
MCH/ICH
MCH Core ---------------- 1.100V ------- : [Auto]
MCH Reference ----------- 0.760V -------- : [Auto]
MCH/DRAM Ref ------------ 0.900V ------- : [Auto]
ICH I/O ----------------- 1.500V -------- : [Auto]
ICH Core ---------------- 1.100V -------- : [Auto]
DRAM
DRAM Voltage ------------ 1.800V ------- :<---- my ram is rated 1.8 and the other is rated at 2.1, so is this a problem here?
DRAM Termination -------- 0.900V ------- : [Auto]
Channel A Reference ----- 0.900V ------- : [Auto]
Channel B Reference ----- 0.900V ------- : [Auto]
Advanced Settings
Limit CPUID Max. to 3 ------------------ : [Disabled]
No-Execute Memory Protect -------------- : [Enabled]
CPU Enhanced Halt (C1E) ---------------- : [Disabled]
C2/C2E State Support ------------------- : [Disabled]
x C4/C4E State Support ----------------- : [Disabled]
CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
CPU EIST Function ---------------------- : [Disabled]
Virtualization Technology ---------------- : [Disabled]
Integrated Peripherals
Legacy USB Storage Detect -------------- : [Disabled]
OK thanks guys please let me know where I'm just not doing things right.
Comment