This is my second EP45-UD3P board and I'm having a couple issues. You guys helped me out last time and I'm hoping you can do it again
My problems are skipping audio, failing prime 95 blend test and the occasional crash during a game. I monitored temps during prime 95 and I don't even think I hit 50c so I don't think temps are my problem.
System is NOT overclocked right now.
Specs:
Case: LIAN LI PC-A05NB
Mobo: GIGABYTE GA-EP45-UD3P
CPU: Intel Core 2 Quad Q8300
CPU Cooler: ZALMAN CNPS9500
Ram: Patriot Viper II 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) (PV224G8500ELK)
HD: Western Digital Caviar Black 750GB
Video Card: EVGA GeForce GTS 250 512MB
PSU: OCZ ModXStream Pro OCZ700MXSP 700W
Running Win 7 Pro x64
I'd like to OC it but right now I'm mostly concerned with getting this audio skip to go away. I've updated all the drivers I can think of.
Settings:
My problems are skipping audio, failing prime 95 blend test and the occasional crash during a game. I monitored temps during prime 95 and I don't even think I hit 50c so I don't think temps are my problem.
System is NOT overclocked right now.
Specs:
Case: LIAN LI PC-A05NB
Mobo: GIGABYTE GA-EP45-UD3P
CPU: Intel Core 2 Quad Q8300
CPU Cooler: ZALMAN CNPS9500
Ram: Patriot Viper II 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) (PV224G8500ELK)
HD: Western Digital Caviar Black 750GB
Video Card: EVGA GeForce GTS 250 512MB
PSU: OCZ ModXStream Pro OCZ700MXSP 700W
Running Win 7 Pro x64
I'd like to OC it but right now I'm mostly concerned with getting this audio skip to go away. I've updated all the drivers I can think of.
Settings:
Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio ..........................: 7x Fine CPU Clock Ratio.....................:+0.<wbr>5 CPU Frequency ...........................: 2.5ghz - 333X7.5 Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Disable] CPU Host Frequency (Mhz) ............: 333 Mhz PCI Express Frequency (Mhz) .........: This is on Auto . Should I set to 100? C.I.A.2 ..............................<wbr>...:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive.........................<wbr>..: <<< 800 PCI Express Clock Drive.................: <<< 900 CPU Clock Skew (ps)....................: <<< 0 MCH Clock Skew (ps)...................: <<< 0 DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [333] System Memory Multiplier ..............: 3.20B Memory Frequency (Mhz) ..............: 1066 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................ 5 tRCD ..............................<wbr>........... 5 tRP'..........................<wbr>.................5 tRAS..........................<wbr>................15 Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go Advanced Timing Control tRRD..........................<wbr>.................4 Auto tWTR..........................<wbr>................4 Auto tWR...........................<wbr>.................8 Auto tRFC..........................<wbr>.................68 Auto tRTP..........................<wbr>.................4 Auto Command Rate (CMD) ....................:0 Auto Driving Strength Profiles Driving Strength ............................ Channel A Static tRead Value.........................<wbr>: Auto tRD Phase0 Adjustment...................:<wbr>Auto <<< Leave for all below as well tRD Phase1 Adjustment...................:<wbr>Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:<wbr>Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................<wbr>: Auto tRD Phase0 Adjustment...................:<wbr>Auto <<< Leave for all below as well tRD Phase1 Adjustment...................:<wbr>Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:<wbr>Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control CPU CPU Vcore….………....................<wbr>.....:Auto CPU Termination…..... 1.200V*.......: Auto CPU PLL…………………....1.500V*.......: << Auto CPU Referen.…………....0.755V*.......<wbr>: <<< Auto CPU Reference2………,,0.800V*.......:<wbr><<< .67% Of Vtt (Termination above) Auto Will set this correctly MCH/ICH MCH Core…………….....1.100V..........<wbr>.: Auto << MCH Reference….…….0.760V..........<wbr>.; Auto<<< Leave MCH/DRAM Ref.…......0.900V...........: Auto <<< Leave ICH I/O……………….....1.500V..........<wbr>..: Auto <<< Leave ICH Core…………...……1.100V...........<wbr>.: Auto <<< Leave DRAM DRAM Voltage ……....1.800V............: 2.10 DRAM Termination .…0.900V............: Auto Channel A Reference 0.900V............: Auto Channel B Reference 0.900V............:Auto Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] (Should I keep this Disabled??) C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function......................<wbr>...: [Disabled] (Same here. disable?) Virtualization Technology................: Don't see this setting...? Integrated Peripherals Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
Comment