I'm building a system.
Gigabyte GA-EX58-UD5
Corsair TR3X6G1600C8D RAM
Corsair 950W PSU
Radeon 4890
WD 300GB HD
I turned the machine on fine with 1 stick of ram in to configure the ram settings in the BIOS. Rebooted just fine.
I added 2 other sticks in and tried booting - only to be met with endless beeping and a black screen. No post, no nothing.
I'm trying to boot with sticks in slots 1, 3, 5 - all the white slots on the mobo. The system will boot with any one stick of RAM in slot 1. If I try to stick a single stick in slot 3 the computer never posts, just hangs at a black screen with no beeps, nothing. I can boot with a single stick in slot 5 just fine too.
I've also tried booting with default RAM settings (1033mhz, etc) anything in slot 3 = no boot.
Any suggestions?
Gigabyte GA-EX58-UD5
Corsair TR3X6G1600C8D RAM
Corsair 950W PSU
Radeon 4890
WD 300GB HD
I turned the machine on fine with 1 stick of ram in to configure the ram settings in the BIOS. Rebooted just fine.
I added 2 other sticks in and tried booting - only to be met with endless beeping and a black screen. No post, no nothing.
I'm trying to boot with sticks in slots 1, 3, 5 - all the white slots on the mobo. The system will boot with any one stick of RAM in slot 1. If I try to stick a single stick in slot 3 the computer never posts, just hangs at a black screen with no beeps, nothing. I can boot with a single stick in slot 5 just fine too.
I've also tried booting with default RAM settings (1033mhz, etc) anything in slot 3 = no boot.
Any suggestions?
Comment