Hello to All.
Just got this board and am experiencing some very wierd stuff.
#1 Once BIOS has posted and just before the OS starts to load all the Phase LEDS switch off and no matter what load the cpu is under they remain off until reboot. From my understanding these are supposed to remain on and display an approximation of load ?
#2 Fails OCCT at stock (2.40GHZ Q6600 VID 1.21250) first thing in the morning after Passing OCCT at (3.60GHz ) the previous evening. Infact fails to boot at previous nights settings almost everyday even if was on stock and is even flaky in normal operation. As day goes on stabilty appears to return.
(I've double checked the settings are being saved fine on the previous night)
#3 EIST doesnt work if the CPU voltage is changed from Normal
All the components have been tested and retested in other systems apart from the motherboard.
I am a fairly experienced system builder and can only think i've got a duff board or i'm really dumb :)
Specs
Q6600 VID 1.21250
Crucial 10th Anniversary DDR2 1GB x 4 / GEIL DDR2 1GB x 2 / Corsair CM2X 1GB x 2
Corsair HX620 PSU
nVidia 7900GTX
Thanks
iNDi
Just got this board and am experiencing some very wierd stuff.
#1 Once BIOS has posted and just before the OS starts to load all the Phase LEDS switch off and no matter what load the cpu is under they remain off until reboot. From my understanding these are supposed to remain on and display an approximation of load ?
#2 Fails OCCT at stock (2.40GHZ Q6600 VID 1.21250) first thing in the morning after Passing OCCT at (3.60GHz ) the previous evening. Infact fails to boot at previous nights settings almost everyday even if was on stock and is even flaky in normal operation. As day goes on stabilty appears to return.
(I've double checked the settings are being saved fine on the previous night)
#3 EIST doesnt work if the CPU voltage is changed from Normal
All the components have been tested and retested in other systems apart from the motherboard.
I am a fairly experienced system builder and can only think i've got a duff board or i'm really dumb :)
Specs
Q6600 VID 1.21250
Crucial 10th Anniversary DDR2 1GB x 4 / GEIL DDR2 1GB x 2 / Corsair CM2X 1GB x 2
Corsair HX620 PSU
nVidia 7900GTX
Thanks
iNDi
Comment