Re: new ep45-DS3L won't post short fast beeps
Okay, here comes my current configuration:
DRAM Performance Control:
Performance Enhance : Standard
Extreme Memory Profile XMP : Auto
GMCH Frequency Latch : Auto
System Memory Multiplier : Auto
Memory Frequency : 1066 MHz
DRAM Tming Selectable: Manual
Standard Timing Control:
CAS Latency Time : 5
tRCD : 5
tRP : 5
tRAS : 15
Advanced Timing Control: (default values)
tRRD : 4
tWTR : 4
tWR : 6
tRFC : 56
tRTP : 4
Command Rate : 0
Channel A and B Timing Settings : (default)
Static tRead Value: 6
tRD Phase0 - 3 Adjustment : 0
Trd2rd : 8
Twr2wr : 8
Twr2rd : 7
Trd2wr : 9
Channel A and B Driving Settings : all auto
DRAM Voltage : 2,100 V
I think that's all. If you need any other values specified, please let me know. Thanks again for your help !
Okay, here comes my current configuration:
DRAM Performance Control:
Performance Enhance : Standard
Extreme Memory Profile XMP : Auto
GMCH Frequency Latch : Auto
System Memory Multiplier : Auto
Memory Frequency : 1066 MHz
DRAM Tming Selectable: Manual
Standard Timing Control:
CAS Latency Time : 5
tRCD : 5
tRP : 5
tRAS : 15
Advanced Timing Control: (default values)
tRRD : 4
tWTR : 4
tWR : 6
tRFC : 56
tRTP : 4
Command Rate : 0
Channel A and B Timing Settings : (default)
Static tRead Value: 6
tRD Phase0 - 3 Adjustment : 0
Trd2rd : 8
Twr2wr : 8
Twr2rd : 7
Trd2wr : 9
Channel A and B Driving Settings : all auto
DRAM Voltage : 2,100 V
I think that's all. If you need any other values specified, please let me know. Thanks again for your help !
Comment