I'm running a Q6600 G0(1.25v VID) on a EP45-UD3R. I can stable at 3.6ghz after 15 minutes of Linpack testing.
However, no matter what voltages I pump in, it will not stay stable at 3.8ghz. It's okay to browse the Internets, listen to music and work on, but under stress testing it BSOD's.
These are the settings I am currently running. Any I miss out, assume they are on auto:
Vcore: 1.57v (1.54v in Windows)
CPU Termination: 1.55v
CPU PLL: 1.7v
MCH: 1.36v
DIMM: 2.2v
C1E and EIST disabled.
There are quite a few other reference voltages, but I am unsure as to what they do. Should I fiddle with them, what should they be set to?
My setup:
Intel Q6600 G0 (1.25v VID)
Gigabyte EP45-UD3R
OCZ Reaper 1066mhz
Radeon 4870
Asus Xonar D2
Corsair HX620W
CPU and graphics watercooled.
However, no matter what voltages I pump in, it will not stay stable at 3.8ghz. It's okay to browse the Internets, listen to music and work on, but under stress testing it BSOD's.
These are the settings I am currently running. Any I miss out, assume they are on auto:
Vcore: 1.57v (1.54v in Windows)
CPU Termination: 1.55v
CPU PLL: 1.7v
MCH: 1.36v
DIMM: 2.2v
C1E and EIST disabled.
There are quite a few other reference voltages, but I am unsure as to what they do. Should I fiddle with them, what should they be set to?
My setup:
Intel Q6600 G0 (1.25v VID)
Gigabyte EP45-UD3R
OCZ Reaper 1066mhz
Radeon 4870
Asus Xonar D2
Corsair HX620W
CPU and graphics watercooled.
Comment