Hi everyone,
finally found a proper place to address my case ;]
So like 2 weeks before I bought the ep45-ds3r gigabyte mobo and a matching pair of ocz reapers 2x2gb 5-5-5-15 @ 2.2v.
Everything went smooth at the beginning and then **** hit the fan ;/
First I was experiencing some weird Vista x64 BSOD's, well I though it's microsoft so it probably needs to bsod once in a while, but while I dug deeper I knew that it's a hardware problem.
First started to use memtest86+ 3.5 with both sticks of ram in 1&3 seatings and the program was restarting, bad ram I thought.
Started to test the sticks separatly one at a time in bank 1.
One was ok to pass 3 loops of test.
The second one was just starting to get errors when the test started.
Bad RAM I thought.
But when I started to experience the same old problem (bsod's) on the "good" stick things got worse and vista x64 didn't even boot.
memtest on the "good" stick, same story ****load of errors right from start.
But then my cousing rang me and said to try to reseat the RAM sticks, so I put them into 2&4 banks, things work wonderful !
Memtest started on both RAM (it was reseting earlier) and everything was starting to look sweet and awsome.
Later on I had another vista bsod sth about memory_management, so I went to memtest them again.
But then I left the memtest to run thru the whole night, and when I got up today the timer was frozen on like 2h and had couple of errors (3-4).
Please help me :D
Bios setting are all on auto/default, only thing I changed was the voltage for my rams (2.2 on the box, but 2.1 was stable, was...).
My other parts are a Intel C2D E8400 (stock settings, still waiting for my new cpu cooling to be avilable), a BFG Geforce GTX 285 (all stock settings), an OCZ 600W PSU, and a 1TB samsung spinpoint F1.
If you need more specs, info or anything just write and I'll post whatever you need ;]
finally found a proper place to address my case ;]
So like 2 weeks before I bought the ep45-ds3r gigabyte mobo and a matching pair of ocz reapers 2x2gb 5-5-5-15 @ 2.2v.
Everything went smooth at the beginning and then **** hit the fan ;/
First I was experiencing some weird Vista x64 BSOD's, well I though it's microsoft so it probably needs to bsod once in a while, but while I dug deeper I knew that it's a hardware problem.
First started to use memtest86+ 3.5 with both sticks of ram in 1&3 seatings and the program was restarting, bad ram I thought.
Started to test the sticks separatly one at a time in bank 1.
One was ok to pass 3 loops of test.
The second one was just starting to get errors when the test started.
Bad RAM I thought.
But when I started to experience the same old problem (bsod's) on the "good" stick things got worse and vista x64 didn't even boot.
memtest on the "good" stick, same story ****load of errors right from start.
But then my cousing rang me and said to try to reseat the RAM sticks, so I put them into 2&4 banks, things work wonderful !
Memtest started on both RAM (it was reseting earlier) and everything was starting to look sweet and awsome.
Later on I had another vista bsod sth about memory_management, so I went to memtest them again.
But then I left the memtest to run thru the whole night, and when I got up today the timer was frozen on like 2h and had couple of errors (3-4).
Please help me :D
Bios setting are all on auto/default, only thing I changed was the voltage for my rams (2.2 on the box, but 2.1 was stable, was...).
My other parts are a Intel C2D E8400 (stock settings, still waiting for my new cpu cooling to be avilable), a BFG Geforce GTX 285 (all stock settings), an OCZ 600W PSU, and a 1TB samsung spinpoint F1.
If you need more specs, info or anything just write and I'll post whatever you need ;]
Comment