Announcement

Collapse
No announcement yet.

Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

    cpuz 1.65 does not show any vcore changes for Z87 UD5H. Is it working for anyone else? It stays stuck on 1.248 for me..... (vcore is set 1.25 but C states active).

    v 1.62.2 is the only other one I had and it works fine.
    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

    Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
    HTPC: Z68 Pro3 M / 2105

    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
    SOLD:Z87X-UD5H /4770K

    Comment


    • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

      Doesn't work for me either, but then AIDA also fails to show any voltage scaling when I've manually set it. All C states are enabled.

      What I've noticed with my board is that on following the initial boot the CPU VRM value registers as scaling down (in AIDA), the VID stays static at whatever i've set it to in the BIOS. However if I run the AIDA stability test the VRM value increases (as expected) but then fails to drop back down again once the test is stopped (even though the CPU drops to an 8x multiplier). The only way to make it drop is a reboot.


      I'm waiting to get my mitts on a multimeter so I can test.
      ----------------------------------------------------------------------------------------------------------------------------------------------
      Gigabyte Z87X-UD5H BIOS v F6L
      16GB GeIL Dragon RAM PC3-12800C11 1600MHz Dual Channel (2x8GB)
      Intel Core i7 4770k @ 4.7ghz
      2 x EVGA 770GTX SC SLI
      2 x Samsung 840 Pro 120GB SSD (RAID0)
      2 x Hitachi 2TB HDD - (RAID1)
      XFX Pro Series 850w PSU
      Corsair Obsidian 900D
      Cooled with a custom 360 rad and EK Supremacy CSQ Clean block with 6 x Corsair SP120 Quiet fans.

      -------------------------------------------------------------------------------------------------------------------

      Comment


      • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

        Originally posted by boondocks View Post
        cpuz 1.65 does not show any vcore changes for Z87 UD5H. Is it working for anyone else? It stays stuck on 1.248 for me..... (vcore is set 1.25 but C states active).

        v 1.62.2 is the only other one I had and it works fine.
        v 1.64.0 is the only version that shows idle voltage for my board.
        Main Rig
        Gigabyte z87x-OC
        Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
        G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
        Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
        Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
        HiS ATI HD 6950
        Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
        Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
        Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
        Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
        CORSAIR CMPSU-850TX PSU
        Swiftech MCP655-B Pump
        EK Supremacy Cpu Block
        Swiftech Mcres Micro Rev 2 Reservoir
        Black Ice GTX Xtreme 360 Radiator




        Comment


        • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

          New Intel Rapid Storage Technology 12.7.1.1000 WHQL
          It is really useful to complete and keep your PC Specs or Signature up to date in Settings /My Profile (motherboard, CPU, BIOS version modified or not ...) - Thank you all .
          Main rig : Z77X-UD5H BIOS F16 mod11 - Core i7 3770K @4.5GHz 1.30V - Noctua NH-D14 - GSkill TridentX 2x8GB @1200MHz CAS10 - Club3D HD5750 noiseless @800/1300 - Silverstone FT02S - Seasonic X-series 650W
          2x Intel 510 128GB RAID0 - 2x Samsung F3 500GB RAID0 + Samsung F3 1TB - Dell U2713H - Logitech Illuminated & G500 - Focal XS Book - Windows 8 Pro 64bits UEFI
          2nd rig : Z77X-UD3H BIOS F20e mod - Core i5 3470 @4.0GHz - Noctua NH-D14 -
          Crucial BT 2x4GB @933MHz CAS9 - Club3D HD7750 noiseless @stock - Lian-Li PC-A05FN - Seasonic M12II 520W
          Crucial M4 128GB - 2x WD10EALX RAID1 - Dell 2408WFP - Logitech Illuminated & G5
          - Bose Companion 20 - Windows 8 Pro 64bits Legacy
          HTPC : EG45M-UD2H BIOS F5a mod - Core2Quad Q8200 @2.8GHz undervolted to 1.10V - Noctua NH-C4 passive - OCZ 4x1GB @500MHz CAS5 - AMD HD6450 passive - Antek NSK2480 - Antec Earthwatts 380W
          Intel SSD 330 60GB - 2x WD WD30EZRX 3TB RAID0 - Logitech K820 - Windows 8 Pro 64bits + XBMC12
          Gigabyte Modified BIOS & About ME firmware

          Comment


          • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

            I couldn't find v1.64 but like I say 1.62.2 seems to work OK. I know 1.64 was working for me but I guess I deleted it off my drive when 1.65 came out.
            Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
            Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
            PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
            Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
            Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

            Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
            HTPC: Z68 Pro3 M / 2105

            SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
            SOLD:Z87X-UD5H /4770K

            Comment


            • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

              Originally posted by boondocks View Post
              I couldn't find v1.64 but like I say 1.62.2 seems to work OK. I know 1.64 was working for me but I guess I deleted it off my drive when 1.65 came out.
              Here you go or anyone else who may need/want....


              CPUZ 1.64.0 OC
              Main Rig
              Gigabyte z87x-OC
              Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
              G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
              Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
              Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
              HiS ATI HD 6950
              Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
              Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
              Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
              Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
              CORSAIR CMPSU-850TX PSU
              Swiftech MCP655-B Pump
              EK Supremacy Cpu Block
              Swiftech Mcres Micro Rev 2 Reservoir
              Black Ice GTX Xtreme 360 Radiator




              Comment


              • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                Updated with:



                DriverVer=07/10/2013,12.7.1.1000

                Comment


                • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                  Originally posted by Acebmxer View Post
                  Here you go or anyone else who may need/want....


                  CPUZ 1.64.0 OC
                  Ah thanks, Ace, I found they still have download links on their site for 1.64 as well.
                  Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
                  Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
                  PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
                  Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
                  Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

                  Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
                  HTPC: Z68 Pro3 M / 2105

                  SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
                  SOLD:Z87X-UD5H /4770K

                  Comment


                  • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                    Originally posted by stasio View Post
                    Updated with:



                    DriverVer=07/10/2013,12.7.1.1000
                    Whoever installs this on Z87 post up how it works for you. The last one wouldn't let me shut down the pc, it would go into a restart cycle >90% of the time. The one before it didn't work well either, so I reverted to 12.6.0.1033.
                    Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
                    Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
                    PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
                    Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
                    Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

                    Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
                    HTPC: Z68 Pro3 M / 2105

                    SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
                    SOLD:Z87X-UD5H /4770K

                    Comment


                    • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                      Originally posted by boondocks View Post
                      Whoever installs this on Z87 post up how it works for you. The last one wouldn't let me shut down the pc, it would go into a restart cycle >90% of the time. The one before it didn't work well either, so I reverted to 12.6.0.1033.
                      Did not try the others but I also was on 12.6.0.1033 with no issues. Updated to latest ones and rebooted a few times no issues as of yet.

                      Edit - and shut down's work
                      Last edited by Acebmxer; 07-30-2013, 10:48 AM.
                      Main Rig
                      Gigabyte z87x-OC
                      Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
                      G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
                      Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
                      Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
                      HiS ATI HD 6950
                      Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
                      Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
                      Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
                      Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
                      CORSAIR CMPSU-850TX PSU
                      Swiftech MCP655-B Pump
                      EK Supremacy Cpu Block
                      Swiftech Mcres Micro Rev 2 Reservoir
                      Black Ice GTX Xtreme 360 Radiator




                      Comment


                      • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                        Nvidia GeForce 326.41 Beta




                        NVIDIA DRIVERS 326.41BETA

                        DriverVer = 07/25/2013, 9.18.13.2641

                        Comment


                        • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                          Originally posted by Acebmxer View Post
                          Did not try the others but I also was on 12.6.0.1033 with no issues. Updated to latest ones and rebooted a few times no issues as of yet.

                          Edit - and shut down's work
                          Thanks, Ace. You can't imagine how frustrated I was before when the computer would reboot instead of shutting down.....finally I calmed down and thought about recent installs (IRST, MEI firmware). I uninstalled both and reinstalled the MEI firmware as well as the older IRST (12.6.0.1033) and the problem went away.

                          So anyway I'll give the newest one a try.
                          Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
                          Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
                          PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
                          Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
                          Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me

                          Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
                          HTPC: Z68 Pro3 M / 2105

                          SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
                          SOLD:Z87X-UD5H /4770K

                          Comment


                          • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                            Most important RST 12.7.1.1000 resolve issue:

                            Comment


                            • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                              Originally posted by stasio View Post
                              Most important RST 12.7.1.1000 resolve issue:

                              So perhaps it wasn't the OROM fault...
                              It is really useful to complete and keep your PC Specs or Signature up to date in Settings /My Profile (motherboard, CPU, BIOS version modified or not ...) - Thank you all .
                              Main rig : Z77X-UD5H BIOS F16 mod11 - Core i7 3770K @4.5GHz 1.30V - Noctua NH-D14 - GSkill TridentX 2x8GB @1200MHz CAS10 - Club3D HD5750 noiseless @800/1300 - Silverstone FT02S - Seasonic X-series 650W
                              2x Intel 510 128GB RAID0 - 2x Samsung F3 500GB RAID0 + Samsung F3 1TB - Dell U2713H - Logitech Illuminated & G500 - Focal XS Book - Windows 8 Pro 64bits UEFI
                              2nd rig : Z77X-UD3H BIOS F20e mod - Core i5 3470 @4.0GHz - Noctua NH-D14 -
                              Crucial BT 2x4GB @933MHz CAS9 - Club3D HD7750 noiseless @stock - Lian-Li PC-A05FN - Seasonic M12II 520W
                              Crucial M4 128GB - 2x WD10EALX RAID1 - Dell 2408WFP - Logitech Illuminated & G5
                              - Bose Companion 20 - Windows 8 Pro 64bits Legacy
                              HTPC : EG45M-UD2H BIOS F5a mod - Core2Quad Q8200 @2.8GHz undervolted to 1.10V - Noctua NH-C4 passive - OCZ 4x1GB @500MHz CAS5 - AMD HD6450 passive - Antek NSK2480 - Antec Earthwatts 380W
                              Intel SSD 330 60GB - 2x WD WD30EZRX 3TB RAID0 - Logitech K820 - Windows 8 Pro 64bits + XBMC12
                              Gigabyte Modified BIOS & About ME firmware

                              Comment


                              • Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

                                Originally posted by boondocks View Post
                                Thanks, Ace. You can't imagine how frustrated I was before when the computer would reboot instead of shutting down.....finally I calmed down and thought about recent installs (IRST, MEI firmware). I uninstalled both and reinstalled the MEI firmware as well as the older IRST (12.6.0.1033) and the problem went away.

                                So anyway I'll give the newest one a try.
                                Originally posted by stasio View Post
                                Most important RST 12.7.1.1000 resolve issue:

                                Originally posted by virtualfred View Post
                                So perhaps it wasn't the OROM fault...
                                My test were done on win8x64 not win7...
                                Main Rig
                                Gigabyte z87x-OC
                                Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
                                G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
                                Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
                                Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
                                HiS ATI HD 6950
                                Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
                                Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
                                Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
                                Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
                                CORSAIR CMPSU-850TX PSU
                                Swiftech MCP655-B Pump
                                EK Supremacy Cpu Block
                                Swiftech Mcres Micro Rev 2 Reservoir
                                Black Ice GTX Xtreme 360 Radiator




                                Comment

                                Working...
                                X