Firstly a hello to every one :)
Now I own a GA-EP45-DQ6 (rev. 1.0) and I had the following specs running in it:
Intel E8400
2 x 1gb Gskill DDR 1066
Nvidia 8800GT
250GB Seagate
It was running perfectly but then yesterday I upgraded the E8400 to a E8600 and now the mobo does not boot properly. When I turn it on the fans all turn on and you can hear them running at full and the mobo just rotates between the different diagnostic leds. The screen remains blank but I can hear the hdd starting and the CD rom I have tried taking these out but it makes no differece. With every 20-30 times I turn it on it will start and once it has started it runs perfectly. I can run games and Prime 95 with no errors. No overheating problems or anyhting. I have tried refashing the bios to F12 and also F13a but this hasn't helped.
I have tried everything I can think of.
Any advice will be apreciated :)
Thanks
Now I own a GA-EP45-DQ6 (rev. 1.0) and I had the following specs running in it:
Intel E8400
2 x 1gb Gskill DDR 1066
Nvidia 8800GT
250GB Seagate
It was running perfectly but then yesterday I upgraded the E8400 to a E8600 and now the mobo does not boot properly. When I turn it on the fans all turn on and you can hear them running at full and the mobo just rotates between the different diagnostic leds. The screen remains blank but I can hear the hdd starting and the CD rom I have tried taking these out but it makes no differece. With every 20-30 times I turn it on it will start and once it has started it runs perfectly. I can run games and Prime 95 with no errors. No overheating problems or anyhting. I have tried refashing the bios to F12 and also F13a but this hasn't helped.
I have tried everything I can think of.
Any advice will be apreciated :)
Thanks
Comment