Hello,
when doing a cold start, my GA-EX58-UD5 (F4R Bios) only recognizes 4 GByte of the 6GB TR3X6G1600C8D I use. This seems to happen only if I let the system work with 1600MHz. Interestingly, memtest86 still tells me I have triple channel RAM, althoug there is only 4 GByte.
I am currently testing the RAM with memtest and there are no errors, but I left the setting at 1066 MHz - Standard. A shame with the Corsairs, but I prefer a stable system.
Could this be due to some BIOS isse, some misconfiguration (I just activated XMP and set VDIMM to 1.64 or set the multiplier to 22 plus the VDIMM to 1.64 again) or defective Hardware?
Kind regards,
Frank
<script type="text/javascript">*<!-- vBulletin.register_control("vB_ProfilefieldEditor" , "7"); //--> I use
</script>
when doing a cold start, my GA-EX58-UD5 (F4R Bios) only recognizes 4 GByte of the 6GB TR3X6G1600C8D I use. This seems to happen only if I let the system work with 1600MHz. Interestingly, memtest86 still tells me I have triple channel RAM, althoug there is only 4 GByte.
I am currently testing the RAM with memtest and there are no errors, but I left the setting at 1066 MHz - Standard. A shame with the Corsairs, but I prefer a stable system.
Could this be due to some BIOS isse, some misconfiguration (I just activated XMP and set VDIMM to 1.64 or set the multiplier to 22 plus the VDIMM to 1.64 again) or defective Hardware?
Kind regards,
Frank
<script type="text/javascript">*<!-- vBulletin.register_control("vB_ProfilefieldEditor" , "7"); //--> I use
</script>
Comment