EX58 extreme does not boot any more Error C1

[kbatman99]

Hello !
My Computer worked very well for 3 month with this motherboard.
But now it does not boot any more and the display on the motherboard shows "C1".
On the monitor there is nothing, the beep of the motherboard does not come and the screen does not even show the start screen.

What can I do ?
I have 6 DDR3 Rams with 12 GB.

Please help

[VorLonUK]

Re: EX58 extreme does not boot any more Error C1

Hello !
My Computer worked very well for 3 month with this motherboard.
But now it does not boot any more and the display on the motherboard shows "C1".
On the monitor there is nothing, the beep of the motherboard does not come and the screen does not even show the start screen.

What can I do ?
I have 6 DDR3 Rams with 12 GB.

Please help

Try Clearing the Cmos.

Also you can search these forums using just "X58" (no quotations) and find the most recent posts and common issues with this chipset/boards.

[kbatman99]

Re: EX58 extreme does not boot any more Error C1

Try Clearing the Cmos.

Also you can search these forums using just "X58" (no quotations) and find the most recent posts and common issues with this chipset/boards.

I have cleared the CMOS with the switch on the back side.
It does not help.

[FlyingScotsman]

Re: EX58 extreme does not boot any more Error C1

Try booting the Pc using only one stick of your ram, in the first white slot
See how that goes

[balance]

Re: EX58 extreme does not boot any more Error C1

same problem i have atm, mine work for about a week

http://forums.tweaktown.com/f69/ud5-post-problem-code-c1-29790/

[kbatman99]

Re: EX58 extreme does not boot any more Error C1

Try booting the Pc using only one stick of your ram, in the first white slot
See how that goes

I tried to boot with one RAM.
But nothing !
No booting no beep just "C1"
Can anybody help me to reactivate my expensive pc ?
Thank you !

[balance]

Re: EX58 extreme does not boot any more Error C1

I tried to boot with one RAM.
But nothing !
No booting no beep just "C1"
Can anybody help me to reactivate my expensive pc ?
Thank you !

j/w did you overclock and what was your setting if you still can remember

[kbatman99]

Re: EX58 extreme does not boot any more Error C1

j/w did you overclock and what was your setting if you still can remember

I overclocked CPU and RAM.
It worked well for 3 weeks and now this !
I cannot rememebr the settings. Sorry.
How can I reset the bios settings to the ok values or switch to the alternate bios ?
Thank you for your answer.

[balance]

Re: EX58 extreme does not boot any more Error C1

I overclocked CPU and RAM.
It worked well for 3 weeks and now this !
I cannot rememebr the settings. Sorry.
How can I reset the bios settings to the ok values or switch to the alternate bios ?
Thank you for your answer.

the only way to reset your values are to clr cmos

did you try the full guide like taking out your battery and leaving it out for 20 min

http://forums.tweaktown.com/f69/bios-flashing-how-qflash-guide-27576/#post258596

but the problem i find is that you wont even be able to get into bios it is as the mobo cannot see the ram, usualy the c1 process takes few sec (all the phase led turns on (green,yellow, red) for few secs and then off for normal boot not it just wont get pass that step