Specs first:
Mobo: EP45-UD3R
CPU: E3110 (aka e8400, could only find 3110's at the time)
RAM: Twin2X4096-6400C5DHX (4 gigs of Corsair RAM)
Vid Card: EVGA 512-P3-N841-AR GeForce 8800GTS (G92) 512MB
Power Supply: Corsair 520 Watts
Case: Antec 900
Oh, 2 of these hard drives: Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive
and an LG HDDVD/BluRay Sata drive
Vista 64 bit Home Premium
The story: I had an Abit IP35 Pro board that went bad. I know it's the board, cause it started with the sound slowly going out then everything went bad. It gave me different errors every time, first the vid card, then the memory, etc. It was just erratic.
So, I go and buy this board, assuming all my ol' gear will work with it. First start-up, everything was good. Then I went and tried to install the stuff from the DVD that came with this board and it began to just shut off. So now it just shuts off at any given time.
I went and attempted to load optimized defaults and it booted up just fine again. I left the computer on, walked around and it stayed on. For some reason, I decided to redo the SATA drives, because it kept showing the DVD drive as a slave. I read a thread about putting the DVD last, so I did that. I have boot drive as 0, other drive as 1, and DVD last. Got rid of the external SATA thing altogether. Still shuts off at any random time.
Tried the 1 stick of RAm, shuts off at any time.
Please help, am addicted to my computer and I need it bad!
Mobo: EP45-UD3R
CPU: E3110 (aka e8400, could only find 3110's at the time)
RAM: Twin2X4096-6400C5DHX (4 gigs of Corsair RAM)
Vid Card: EVGA 512-P3-N841-AR GeForce 8800GTS (G92) 512MB
Power Supply: Corsair 520 Watts
Case: Antec 900
Oh, 2 of these hard drives: Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive
and an LG HDDVD/BluRay Sata drive
Vista 64 bit Home Premium
The story: I had an Abit IP35 Pro board that went bad. I know it's the board, cause it started with the sound slowly going out then everything went bad. It gave me different errors every time, first the vid card, then the memory, etc. It was just erratic.
So, I go and buy this board, assuming all my ol' gear will work with it. First start-up, everything was good. Then I went and tried to install the stuff from the DVD that came with this board and it began to just shut off. So now it just shuts off at any given time.
I went and attempted to load optimized defaults and it booted up just fine again. I left the computer on, walked around and it stayed on. For some reason, I decided to redo the SATA drives, because it kept showing the DVD drive as a slave. I read a thread about putting the DVD last, so I did that. I have boot drive as 0, other drive as 1, and DVD last. Got rid of the external SATA thing altogether. Still shuts off at any random time.
Tried the 1 stick of RAm, shuts off at any time.
Please help, am addicted to my computer and I need it bad!
Comment