Hi all, i've been lurking around these forums but couldn't get a solution by my own (sorry).
I just build a simple nice budget gaming pc with the following specs:
- E7300
- GEIL 2 GB DDR2-800 Kit (GX22GB6400UDC)
- GA-EP45-DS3R (with F10 bios)
- Sapphire HD4870
- Corsair 650w
- Artic Freezer Pro
(nothing is overclocked btw)
Everything works fine, but i started searching the internet for some info about how to set my memory timings because i found out that my memory was made for [email protected]
I tried to change the recommended timings (4-4-4-12) and voltage (2.1) in the bios but then my system would boot 2 times and display the warning in the bios that something went wrong, and that the settings maybe wouldn't be accurate anymore.
i also had a go with MemSet 3.6 like described in the "memory timings explained" topic but with no real success. I could change all of the main timings to the correct ones except the main (tCL) is stuck at 5. So i changed everything back to default (5-5-5-15)
Everything in my bios is now set to Auto. (ps. wil it not damage my system if i continue to run it like this?) i now have the following result with cpu-z etc.
What am i doing wrong? or what should i do?
Any help is appreciated.
I just build a simple nice budget gaming pc with the following specs:
- E7300
- GEIL 2 GB DDR2-800 Kit (GX22GB6400UDC)
- GA-EP45-DS3R (with F10 bios)
- Sapphire HD4870
- Corsair 650w
- Artic Freezer Pro
(nothing is overclocked btw)
Everything works fine, but i started searching the internet for some info about how to set my memory timings because i found out that my memory was made for [email protected]
I tried to change the recommended timings (4-4-4-12) and voltage (2.1) in the bios but then my system would boot 2 times and display the warning in the bios that something went wrong, and that the settings maybe wouldn't be accurate anymore.
i also had a go with MemSet 3.6 like described in the "memory timings explained" topic but with no real success. I could change all of the main timings to the correct ones except the main (tCL) is stuck at 5. So i changed everything back to default (5-5-5-15)
Everything in my bios is now set to Auto. (ps. wil it not damage my system if i continue to run it like this?) i now have the following result with cpu-z etc.
What am i doing wrong? or what should i do?
Any help is appreciated.
Comment