Figured my first post here should be a request for tech info...
I just built a Linux system around a GA-EP45-DS3R mobo (F10 BIOS), Q6600, and 2x2GB Crucial DDR2 1066. The RAM voltage is shown in the BIOS settings as 1.8V, but reads on the PC Health BIOS page as 1.98V, and Linux is seeing the same result.
So, the questions:
1 - Can I trust the 1.98V reading?
2 - Where can I probe with a voltmeter to verify?
Thanks!
I just built a Linux system around a GA-EP45-DS3R mobo (F10 BIOS), Q6600, and 2x2GB Crucial DDR2 1066. The RAM voltage is shown in the BIOS settings as 1.8V, but reads on the PC Health BIOS page as 1.98V, and Linux is seeing the same result.
So, the questions:
1 - Can I trust the 1.98V reading?
2 - Where can I probe with a voltmeter to verify?
Thanks!
Comment