Setup:
Core 2 Duo e6400
2x 1G Corsair DD2 800 5-5-5-12 1.9V
550W PSU
On my old Asus P5B, I overclocked my e6400 to 8x400MHz with 1.4V vCore
On the EP45-UD3P, strange things happen. Tested each one of these settings individually, then together. This works:
vCore 1.5V (core temp is 31C at that voltage)
LLC enabled/disabled
5-5-5-12
Mem 1.9V
Multiplier 8
FSB 366MHz
When I put it to 400MHz, I get the constant short beeps that mean "power error" and have to reset the CMOS. Doesn't matter what combination of settings I use - the moment I hit 400MHz, it becomes unhappy. Anybody know what this problem is and/or what I can do to fix it?
Thanks.
Core 2 Duo e6400
2x 1G Corsair DD2 800 5-5-5-12 1.9V
550W PSU
On my old Asus P5B, I overclocked my e6400 to 8x400MHz with 1.4V vCore
On the EP45-UD3P, strange things happen. Tested each one of these settings individually, then together. This works:
vCore 1.5V (core temp is 31C at that voltage)
LLC enabled/disabled
5-5-5-12
Mem 1.9V
Multiplier 8
FSB 366MHz
When I put it to 400MHz, I get the constant short beeps that mean "power error" and have to reset the CMOS. Doesn't matter what combination of settings I use - the moment I hit 400MHz, it becomes unhappy. Anybody know what this problem is and/or what I can do to fix it?
Thanks.
Comment