The problem i encouter is that when i'm working like doing disk defragment, or prime test my comp monitor seem to lose connection. I dont it its the monitor since when i try to see if my keyboard works the num lock light doesnt change whenever i press the button. All the power is on since my mouse and keyboard has light and my DVD drive can open. It only occured when i started overclocking.
3.00GHZ overclook seemed fine without any problem, tested with prime/occt seperately. I'm looking to overclock to about 3.2GHZ
My motherboard is EP35C-DS3R, with inter core quad Q6600. 2x2GB OCZ PC2 6400 ram dual channel.
In the bios i have set the vcore to 1.425, ram to +0.3, +0.1 to PCI-E and FSB, 0.2 on MCH.
CPU clock ratio is set at 8
CPU frequency set at 402Mhz
system multiplier at 2.00
memory frequency = 800/804
Standard timing control
6
6
6
18
and advanced timing control set as auto
Thanks in advance.
3.00GHZ overclook seemed fine without any problem, tested with prime/occt seperately. I'm looking to overclock to about 3.2GHZ
My motherboard is EP35C-DS3R, with inter core quad Q6600. 2x2GB OCZ PC2 6400 ram dual channel.
In the bios i have set the vcore to 1.425, ram to +0.3, +0.1 to PCI-E and FSB, 0.2 on MCH.
CPU clock ratio is set at 8
CPU frequency set at 402Mhz
system multiplier at 2.00
memory frequency = 800/804
Standard timing control
6
6
6
18
and advanced timing control set as auto
Thanks in advance.
Comment