EP45-UD3P bluescreen with IDE harddrive

[dogeye]

Now it boots up and can get to bios, but when I try to install windows, it shows bluescreen saying "hardware broken" or something like that. I also tried to use a harddrive with system already installed, simillar thing happened, it's worse, it keeps bluescreen + reboot. is there anything special I need to set for IDE harddrive? Thank you very much!
P.S. I didn't change any seting in bios except the boot order.

[Lsdmeasap]

Re: EP45-UD3P bluescreen with IDE harddrive

What do you have set in integrated peripherals page? Please post a image of this page.

And be sure you have your jumper set correctly for your drive/cable order. Old install will not work, so you should not worry about trying that out

[dogeye]

Re: EP45-UD3P bluescreen with IDE harddrive

Ha, turns out the copy of Windows doesn't like it's new home. :-) changed a copy, and it worked.
Thank you all the same, Lsdmeasap! I'm sure I'll have more problems to trouble you when I start to overclock. :-P

[Lsdmeasap]

Re: EP45-UD3P bluescreen with IDE harddrive

Great to hear! Glad you are all fixed up now, what was wrong did you burn the disk to fast? I always suggest SLOWEST Burn for OS Disks