Hi LS, I have been up and stable going on 3rd week now . Playing games and FSX. Happy to report no problems at all. I now would like to clock this E8600 to start @ 4.0 GHZ. Would you be so kind and check my settings to achive this.
Thanks for all your help, Riley810
Systems Specs: Gigabyte EP45-UD3R Bios F3
CPU Intel E8600, under full load @ 1.216 V
Memory GSkill PC6400 4-4-4-12 @ 1.9 V
Vid Card Nvidia GTX-260 OC Driver 180.43 Beta
PSU PC Power Cooling 610 watt 49A 12V rail
Zalman CNPS 9700
Current Bios Settings:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ..........................: 10x
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 3.33hz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333MHz
PCI Express Frequency (Mhz) .........:100MHz <--Always 100!!
C.I.A.2 .................................:[Disabled]
Advanced <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street w:st="on"><st1:address w:st="on">Clock Control
CPU Clock Drive</st1:address></st1:Street>...........................:<st1:Street w:st="on"><st1:address w:st="on">800
PCI Express Clock Drive</st1:address></st1:Street>.................:900
CPU Clock Skew (ps)....................:0
MCH Clock Skew (ps)...................:0
DRAM Performance Control
Performance Enhance...................: Standard [STANDARD]
Extreme Memory Profile (X.M.P.).....:Disabled Disabled
(G)MCH Frequency Latch...............:333mhz
System Memory Multiplier ..............: 2.40B<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Memory Frequency (Mhz) ..............: 800Mhz
DRAM Timing Selectable ................: Manual<o:p></o:p>
<o:p> </o:p>
<o:p> </o:p>
Standard Timing Control
CAS Latency Time........................4
tRCD .........................................4
tRP'...........................................4
tRAS..........................................12
Set all highest below first then lower later
Advanced Timing Control
tRRD...........................................3 manual
tWTR..........................................3 manual
tWR............................................4 manual<o:p></o:p>
tRFC...........................................52 manual
tRTP...........................................3 manual
Command Rate (CMD) ....................2 manual<o:p></o:p>
Driving Strength Profiles
Driving Strength ............................ 1066
Channel A
Static tRead Value.........................:7 manual
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................:7 manual
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage ControlEnabled
CPUMCH/ICHDRAMAdvanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................:Currently Enabled
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: Currently Enabled
Virtualization Technology................: Currently Enabled
Thanks for all your help, Riley810
Systems Specs: Gigabyte EP45-UD3R Bios F3
CPU Intel E8600, under full load @ 1.216 V
Memory GSkill PC6400 4-4-4-12 @ 1.9 V
Vid Card Nvidia GTX-260 OC Driver 180.43 Beta
PSU PC Power Cooling 610 watt 49A 12V rail
Zalman CNPS 9700
Current Bios Settings:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ..........................: 10x
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 3.33hz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333MHz
PCI Express Frequency (Mhz) .........:100MHz <--Always 100!!
C.I.A.2 .................................:[Disabled]
Advanced <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street w:st="on"><st1:address w:st="on">Clock Control
CPU Clock Drive</st1:address></st1:Street>...........................:<st1:Street w:st="on"><st1:address w:st="on">800
PCI Express Clock Drive</st1:address></st1:Street>.................:900
CPU Clock Skew (ps)....................:0
MCH Clock Skew (ps)...................:0
DRAM Performance Control
Performance Enhance...................: Standard [STANDARD]
Extreme Memory Profile (X.M.P.).....:Disabled Disabled
(G)MCH Frequency Latch...............:333mhz
System Memory Multiplier ..............: 2.40B<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Memory Frequency (Mhz) ..............: 800Mhz
DRAM Timing Selectable ................: Manual<o:p></o:p>
<o:p> </o:p>
<o:p> </o:p>
Standard Timing Control
CAS Latency Time........................4
tRCD .........................................4
tRP'...........................................4
tRAS..........................................12
Set all highest below first then lower later
Advanced Timing Control
tRRD...........................................3 manual
tWTR..........................................3 manual
tWR............................................4 manual<o:p></o:p>
tRFC...........................................52 manual
tRTP...........................................3 manual
Command Rate (CMD) ....................2 manual<o:p></o:p>
Driving Strength Profiles
Driving Strength ............................ 1066
Channel A
Static tRead Value.........................:7 manual
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................:7 manual
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage ControlEnabled
CPUMCH/ICHDRAMAdvanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................:Currently Enabled
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: Currently Enabled
Virtualization Technology................: Currently Enabled
Comment