Dear verybody
Please help me this:
I have bought a ep43-ds3l mobo running [email protected]
Windows vista 64bit
4x1GB DDR2-SDRAM Kingston 800Mhz.
I use intel stock fan for pentium D (copper core)
While running at 3.6Ghz(9.5x379) The full load temp when do CPU stress with orthos is 67 Celcius Degree.
I can pass orthos for tress CPu for 8hours, but cannot pass blend test or 15 minutes.
RAM:FSB ratio is 1:1
My memory is running under its real speed (758/800Mhz)
VDRAM i tried 1.8 to 2.2 but still unstable
TIMING is set to 5-5-5-12 or 6-6-6-18: still unstable
Vcore for CPU stable at 3.6Ghz is 1.4v
pls kindly help to get memory stable
My bios ver is lastest (F8)
P/s: I cnt find any difference between using Ctrl-F1 for not using this when configure Bios setting in M.i.T section
Please help me this:
I have bought a ep43-ds3l mobo running [email protected]
Windows vista 64bit
4x1GB DDR2-SDRAM Kingston 800Mhz.
I use intel stock fan for pentium D (copper core)
While running at 3.6Ghz(9.5x379) The full load temp when do CPU stress with orthos is 67 Celcius Degree.
I can pass orthos for tress CPu for 8hours, but cannot pass blend test or 15 minutes.
RAM:FSB ratio is 1:1
My memory is running under its real speed (758/800Mhz)
VDRAM i tried 1.8 to 2.2 but still unstable
TIMING is set to 5-5-5-12 or 6-6-6-18: still unstable
Vcore for CPU stable at 3.6Ghz is 1.4v
pls kindly help to get memory stable
My bios ver is lastest (F8)
P/s: I cnt find any difference between using Ctrl-F1 for not using this when configure Bios setting in M.i.T section
Comment