If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Is there a changelog for the beta versions of the BIOS'?
I've got a GA-Z87X-UD5H and 4 of the back USB 3.0 ports have quit working. Looking around, it looks like others have experienced this as well. The ports aren't dead as I can power USB speakers with them. Hoping a new BIOS would fix. I see F10c is out and hoping to find a changelog before I flash.
they don't usually list any changelog,its just a case of trying the bios and see if it cures your issue,if not you can always flash back to previous bios
Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
they don't usually list any changelog,its just a case of trying the bios and see if it cures your issue,if not you can always flash back to previous bios
THanks for the response. Just flashed F10c but still the same issue. Gigabyte support has been a joke so far. Offered a couple of suggestions over the span of a couple of days but now wanting me to just RMA the board. I don't really feel like taking the whole PC apart and waiting weeks to get a refurb back.
Is there a changelog for the beta versions of the BIOS'? I've got a GA-Z87X-UD5H and 4 of the back USB 3.0 ports have quit working. Looking around, it looks like others have experienced this as well. The ports aren't dead as I can power USB speakers with them. Hoping a new BIOS would fix. I see F10c is out and hoping to find a changelog before I flash.
I don't think a bios is going to fix it. I never had any problems with my Z87X-UD5H so it must be something else. I've had experience with Gigabyte repairs.....they will fix your current board if possible, and ship it back UPS 3 day (or at least they did for me). Turn around time from Florida to California where Gigabyte is was around 11 days. Anyway good luck.
Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
Is there a changelog for the beta versions of the BIOS'?I've got a GA-Z87X-UD5H and 4 of the back USB 3.0 ports have quit working. Looking around, it looks like others have experienced this as well. The ports aren't dead as I can power USB speakers with them. Hoping a new BIOS would fix. I see F10c is out and hoping to find a changelog before I flash.
I have the same motherboard and experienced a similar problem when trying to use VIA VL812 usb 3 hubs. what I had to do was a complete bios motherboard reset pulling the battery on the motherboard, unplugging and hitting bios resets and holding power to drain any caps or remaining power. my USB ports were also "disabled"
I have the same motherboard and experienced a similar problem when trying to use VIA VL812 usb 3 hubs. what I had to do was a complete bios motherboard reset pulling the battery on the motherboard, unplugging and hitting bios resets and holding power to drain any caps or remaining power. my USB ports were also "disabled"
Board has Renesas hubs BTW.
But still sounds like a good idea.
Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
I have the same motherboard and experienced a similar problem when trying to use VIA VL812 usb 3 hubs. what I had to do was a complete bios motherboard reset pulling the battery on the motherboard, unplugging and hitting bios resets and holding power to drain any caps or remaining power. my USB ports were also "disabled"
Thanks for the suggestion. Just gave it a shot and still no luck. I've got an RMA submitted and going to take apart this weekend... sigh
Comment