If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
Set Main or Backup and Single BIOS,let say flash latest Beta.
OK. I will try later, I have to go work in garden for a while before it gets hot.
Thanks.
Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
Set Main or Backup and Single BIOS,let say flash latest Beta.
Well Stasio it worked.
After these years and I still did not ever use FPT before!
Learned something new today.
Thanks you!
Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
Hi, I have a Gigabyte GA-78LMT-S2P (rev. 4.0) motherboard. The latest BIOS (updated in late 2012, Ver. FDc) supports up to AMD FX-8300 (95w). I would like to upgrade to a FX-8320E which is same 95w and has the same Core Name (Vishera) and Stepping (C0) as the FX-8300 (95w). I wonder is there a beta BIOS can support the FX-8320E.
Hi folks, I am new to the forum and is nice to meet you, I ask the Z87 motherboard will have Broadwell support ??? z87x UD4H and have a while ago that no updates, thank you and excuse my English, Greetings
Z97X-UD5H bios F10b can that be flashed back or same as F9?
Anything change?
Thanks
If you flash F10b and decide to go back you'll have to try FPT flash, same as with F9.
One thing I noticed is after loading optimized defaults, the uncore will idle down to 8X. But once I increased the clock (overclock) the uncore stayed on 40X.
If that doesn't bother you then it appears to work OK otherwise at a quick glance but I haven't spent much time with it.
If you flash F10b and decide to go back you'll have to try FPT flash, same as with F9.
One thing I noticed is after loading optimized defaults, the uncore will idle down to 8X. But once I increased the clock (overclock) the uncore stayed on 40X.
If that doesn't bother you then it appears to work OK otherwise at a quick glance but I haven't spent much time with it.
+
I can confirm this "problem", but it doesnt matter that much. But the Board runs stable as hell. I updated the modules with ubu too. Thanks stasio btw.
stasio mate anything new for the gigabyte z97oc force ?
if there is got a link to the latest tweaked version with all the goodies i know how you like this board as you have the same as me :D
stasio mate anything new for the gigabyte z97oc force ?
if there is got a link to the latest tweaked version with all the goodies i know how you like this board as you have the same as me :D
For tweaked version (F7) use latest UBU 1.24 and flash latest ME fw 9.1.26.1006.
For tweaked version (F7) use latest UBU 1.24 and flash latest ME fw 9.1.26.1006.
Nice thanks btw
is it possible to change the internal nic on these boards from killer nic to intel nic with a nic firmware flash cause every single os i install even windows latest 10 requires a driver to be installed to get it to work and does not work at all from internal drivers.
wish i got a motherboard with intel nic lol
if not is it possible to port the killer driver into the os in question, does this killer driver come without the software and just the nic driver by its self as i dont need or want the software that comes pre installed along with the driver.
Comment