LSD, will be using a gigabyte GA-EP45-UD3P, 2x2gb sticks of mushkin 996580. The following is the settings I asked for at the mushkin tech forum. Please look over and give any feedback how you feel of the settings.
The note about the 1 stick was a question I had for them, they responded to my follow up: if using vista 64 with sp1, o.k. to install vista with 2 sticks of 2 gb.
Code:
Performance Enhance: Standard (Higher can provide addional performance, tweak later) Extreme Memory Profile (X.M.P): Disabled (G)MCH Frequency Latch: 333 or 400Mhz , Auto if no post System Memroy Mutliplier(SPD): 800Mhz CAS Latency Time: 4 tRCD: 4 tRP: 4 tRAS: 12 >Advanced Timing Control tRRD: 4(3-5) tWTR: 5(2-5) tWR: 6(4-6) tRFC: 60(50-60) tRTP: 6(4-6) Command Rate(CMD): 2T >>>>>> Channel A Static tRead Value: 8(5-6 with 266-333fsb 7-9 over 400FSB normally, 6 sometimes works too) tRD Phase(0-3) Adjustment: Auto * Trd2rd(Different Rank): Auto * >>>>>> Channel B Static tRead Value: 8(5-6 with 266-333fsb 7-9 over 400FSB normally, 6 sometimes works too) If not vista sp1, installing vista with only 1 stick would be best, getting windows updates then installing second stick. tRD Phase(0-3) Adjustment: Auto * Trd2rd(Different Rank): Auto * *Adjusting these normally doesn't provide as much gains as 1 lower Static tRread Value itself, but will help provide additional performance when tweaked DRAM Voltage: +0.2 - +0.3v MCH Voltage: +0.1 to +0.2v
Comment